...
Please note: Commands can be entered by typing the full command or the abbreviation indicated by the uppercase letters. The commands can must be entered in lowercase or uppercase letters.
There is an overlap between menus, as shown by the configuration menu (type co or more letters of the command) below:
...
Important commands in the main menu:
| Command | Description |
|---|---|
| Boot from the primary boot device. |
BOOT ALTboot alt | Boot from the alternative boot device. |
BOOT boot device | Boot from device with specified device path. Example device path: 0/0/1/0.0.0 |
PATH PRIpath pri | Display primary boot path. |
PATH ALTpath alt | Display alternative boot path. |
PATH path <PRI pri | ALT alt> path | Set the boot path. If neither PRI nor ALT is specified, the primary path will be set. |
SEARCH | Search for boot devices |
lif path lifimage | Boot a lif file. This parameter is currently mostly used for testing. Use only as advised by Stromasys. The path parameter is a SCSI device path for 64-bit systems, on a 32-bit system it can be the device path of a network card or a SCSI device path. The lifimage parameter contains the path of the bootable lif file (absolute path or path relative to the directory in which the emulator runs). |
RESETreset | Restart the system. |
| Div | ||
|---|---|---|
| ||
Important commands only available in the configuration menu:
| Command | Description |
|---|---|
AUTOauto | Display the autoboot settings. |
AUTO BOOT ON | OFFauto boot on | off | Enable or disable system autoboot. |
BOOTINFObootinfo | Displays a summary of boot parameter and paths as shown below:
|
DEFAULTdefault | Reset the parameter values to the predefined settings. |
...
- Start the Charon instance.
- At the PDC menu, enter
BOOT PRIto boot pri to boot from the main path. - At the prompt
Interact with IPL (Y or N)? >, enterY. - At the
ISL>prompt, enter the commandODE. - At the ODE> prompt, enter
RUN MAPPER2.
...