...
There is an overlap between menus, as shown by the configuration menu (type co or more letters of the command) below:
Important general commands that exist in both menusin the main menu:
| Command | Description |
|---|---|
| Boot from the primary boot device. |
BOOT ALT | Boot from the alternative boot device. |
BOOT device | Boot from device with specified device path. Example device path: 0/0/1/0.0.0 |
PATH PRI | Display primary boot path. |
PATH ALT | Display alternative boot path. |
PATH <PRI | ALT> path | Set the boot path. If neither PRI nor ALT is specified, the primary path will be set. |
SEARCH | Search for boot devices |
lif path lifimage | Boot a lif file. This parameter is currently mostly used for testing. Use only as advised by Stromasys. The path parameter is a SCSI device path for 64-bit systems, on a 32-bit system it can be the device path of a network card or a SCSI device path. The lifimage parameter contains the path of the bootable lif file (absolute path or path relative to the directory in which the emulator runs). |
RESET | Restart the system. |
| Div | ||
|---|---|---|
| ||
Important commands only available in the configuration menu:
...
Please note: the service menu and the information menu currently do not contain important additional commands.
| Div | ||
|---|---|---|
| ||
ODE MAPPER2 Program
The MAPPER2 program can be used to report all the emulated hardware of the emulated historic HP3000 or HP9000 system.
...