| Include Page |
|---|
| KBCOMMON:KB-CSSstyle |
|---|
| KBCOMMON:KB-CSSstyle |
|---|
|
Table of Contents
...
LPV11 Line Printer Controller
CHARON-VAX / CHARON-PDP Q-bus systems provide support for the LPV11 Parallel Line Printer Controller.
...
The LPV11 (being a CHAPI component) provides the following configuration parameters, to be specified using the "set" command:
address
| Parameter | address |
|---|
| Type | Numeric |
|---|
| Value | Specifies the CSR address. This address must be a valid QBUS 22-bit address in an I/O space. The initial value is 017777514, which is the factory setting for an LPV11. |
|---|
vector
| Parameter | vector |
|---|
| Type | Numeric |
|---|
| Value | Specifies the interrupt vector. The initial value is 0200, which is the factory setting for an LPV11. |
|---|
parameters
| Parameter | parameters |
|---|
| Type | Text String |
|---|
| Value | Specifies the name of the file in which the LPV11 prints the text, the name of a physical printer or a TCPIP port to connect to an external utility, like HOSTPrint, (along with some additional parameters): | Parameters | Description |
|---|
| "\\.\LPT<N>" | Host port to connect to a physical printer | | "port" | TCP/IP port to connect to an external application | | "application" | An application to run after opening the port. Note: the name of the application including its own parameters must be framed within ‘ characters (apostrophe). | | -port | The TCP/IP port the HOSTprint utility will connect to. | | -fontsize | The font size to be used for printing. | | -font | The font to be used for printing. The font name must be framed with \ (backslash) symbols. |
|
|---|
...
| Include Page |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
|
DUMMY_VCB02 device
| Info |
|---|
This description applies only to MicroVAX 3600, MicroVAX 3900, VAXserver 3900 and VAXserver 3600 server emulations. |
...