...
| Parameter | stop_on | |
|---|---|---|
| Type | Text string | |
| Value | Specifies what byte sequences received over the physical serial line will trigger a STOP condition. The STOP condition causes CHARON-AXP to exit. Specify either “F6” or “none” ("none" disables triggering a STOP condition). Example:
The default value is "none". Setting "F6" triggers the STOP condition upon receipt of the "
|
| Div | ||
|---|---|---|
| ||
log
| Parameter | log | ||||
|---|---|---|---|---|---|
| Type | Text string | ||||
| Value | A string specifying a file name to store the content of the console sessions or a directory where the log files for each individual session will be stored. If an existing directory is specified, CHARON-AXP automatically enables creation of individual log files, one for each session using the same scheme as used for the generation of the rotating log files. If the "log" parameter is omitted, CHARON-AXP does not create a console log. Examples:
|
...
| Parameter | host | |
|---|---|---|
| Type | Text string | |
| Value | A remote host’s IP address or hostname (and optionally a remote TCP/IP port number) for the virtual serial line connection. If omitted, the virtual serial line does not initiate a connection to the remote host and will listen for incoming connection requests. Specify the value in the following form:
If the "<port-no>" is not specified, the virtual serial line uses the TCP/IP port number specified by the "port" parameter (see below). |
| Div | ||
|---|---|---|
| ||
port
| Parameter | port |
|---|---|
| Type | Numeric |
| Value | The TCP/IP port number for the virtual serial line. A virtual serial line always listens on this port for incoming connection requests. If multiple virtualized machines are running on a server, ensure the port number is unique across the platform. |
...
| Include Page | ||||
|---|---|---|---|---|
|
| Div | ||
|---|---|---|
| ||
Mapping Serial line controllers to system resources
...