Page Comparison

...

1. Install the EMULEX LightPulse PCI/PCI-X/PCIe FC adapter (see below above for a list of supported models) to some spare PCI/PCI-X/PCIe slot of the host system
2. Build PPT driver for EMULEX LightPulse PCI/PCI-X/PCIe FC
3. Install PPT driver for EMULEX LightPulse PCI/PCI-X/PCIe FC
4. Add PPT driver for EMULEX LightPulse PCI/PCI-X/PCIe FC to Linux startup
5. Map KGPSA-CA adapter(-s) to EMULEX LightPulse PCI/PCI-X/PCIe FC adapter instance(-s) in CHARON-AXP configuration file

...

The CHARON-AXP FC Fabric presentation mode allows to use Linux FC HBA directly. When using this mode, there is no need to load KGPSA adapter(s) as it was described before. The following syntax has to be used instead:

Example:

...

The list of the LUNs to be excluded. If empty (default), nothing is excluded.
 No multi line is possible for this parameter; the maximum number of symbols inside the double quotes is 255. Use "lun_include" parameter instead if a lot of LUNs must be excluded to specify only the included LUNs.

Example:

load kgpsa_generic_storage PGA lun_exclude="6008-05F3-0005-2950-C758-BCC2-E88B-0007,6008-05F3-0005-2950-8B03-E26B-E231-0005"

...

The list of the LUNs to be included. If empty (default), all LUNs are included.
 No multi line is possible for this parameter; the maximum number of symbols inside the double quotes is 255. Use "lun_exclude" parameter instead if a lot of LUNs must be included to specify only the excluded LUNs.

Example:

load kgpsa_generic_storage PGA lun_include="6008-05F3-0005-2950-C758-BCC2-E88B-0007,6008-05F3-0005-2950-8B03-E26B-E231-0005"

...