Page Comparison

...

...

1. Copy the sample script "/opt/charon/bin/charon.service" ( "/opt/charon/bin/charon.service" for Fedora Core Linux ) to your home directory ( Red Hat Linux Linux 6.x) or to "/usr/lib/systemd/system/" directory (Fedora Coreor to your home directory (Red Hat Linux 6.x)), for example:

   Red Hat Linux 6.x	$ cp /opt/charon/bin/charon /my_services/es40_service $ chmod 755 /my_services/es40_service
   Red Hat Linux 7.x and Fedora CoreCentOS 7.x	$ cp /opt/charon/bin/charon.service /usr/lib/systemd/system/es40.service $ chmod 755 /usr/lib/systemd/system/es40.service

2. Edit the renamed file to replace sample values of the following parameters, for example:

   Red Hat Linux 6.x	exec="/opt/charon/bin/es40" prog="my_es40" config="/my_services/es40-service.cfg"
   Red Hat Linux 7.x and Fedora Core CentOS 7.x	ExecStart=/opt/charon/bin/es40 -d /my_services/es40-service.cfg WorkingDirectory=/my_services

    "my_es40" is a service name in the example above

             

3. Create and edit the configuration file ( "/my_services/es40-service.cfg" in the examples above ) the way it was described before and make sure that the following pre-requisites are met:

   • OPA0 must be configured as virtual port or physical console, not as operator console, for example:

     load virtual_serial_line OPA0 port=10003 #load operator_console OPA0

   • Use only absolute paths to log, toy clock, nvram files and all the other data such as disk images etc. The names of the references files must be unique too, for example

     ... set session log="/CharonInstances/1st_es40.log" set rom container="/CharonInstances/1st_es40.bin" set toy container="/CharonInstances/1st_es40.dat" set PKA container[0]="/CharonInstances/1st_es40_boot_disk.vdisk" ...

   • Make sure the same physical devices are not used by other CHARON-AXP daemons, same for the OPA0 console port number.
     
     

...

Once the configuration file is ready run the following commands (from the examples above) to install and start CHARON-AXP as daemon:

...

To stop a CHARON-AXP daemon use the following command, for example:

Please note that before stopping CHARON-AXP service, one must shutdown the operating system running in CHARON-AXP. 

...

To remove a CHARON-AXP daemon use the following commands, for example:

...