| Anchor | ||||
|---|---|---|---|---|
|
| Include Page | ||||
|---|---|---|---|---|
|
...
Every instance of KGPSA-CA works in one of the two following modes:
- 695402720 Fabric virtualization mode (creating virtual fabric in combination with virtual FC-3 Storage Controller). This is default mode.
- 695402720 Pass Through mode (using a specific CHARON PCI Pass Through driver)
- 695402720 Fabric presentation mode (using Linux FC HBA directly)
...
The CHARON-AXP FC Fabric presentation mode allows to use Linux FC HBA directly. When using this mode, there is no need to load KGPSA adapter(s) as it was described before. The following syntax has to be used instead:
Example:
load kgpsa_generic_storage PGA interface="host3" |
...
The list of the LUNs to be excluded. If empty (default), nothing is excluded.
No multi line is possible for this parameter; the maximum number of symbols inside the double quotes is 255. Use "lun_include" parameter instead if a lot of LUNs must be excluded to specify only the included LUNs.
Example:
load kgpsa_generic_storage PGA lun_exclude="6008-05F3-0005-2950-C758-BCC2-E88B-0007,6008-05F3-0005-2950-8B03-E26B-E231-0005" |
...
The list of the LUNs to be included. If empty (default), all LUNs are included. No multi line is possible for this parameter; the maximum number of symbols inside the double quotes is 255. Use "lun_exclude" parameter instead if a lot of LUNs must be included to specify only the excluded LUNs.
Example:
load kgpsa_generic_storage PGA lun_include="6008-05F3-0005-2950-C758-BCC2-E88B-0007,6008-05F3-0005-2950-8B03-E26B-E231-0005" |
...