Page Comparison

...

• If the folder does not exist, by default created at CHARON installation, create it and copy the tar file in this directory. In the example below, we assume the tar file was downloaded in the /charon folder and kit number is 4142:

  # mkdir -p /opt/charon/utils # cp /charon/charon_linux_toolkit.kit41kit42.tar /opt/charon/utils

  .

• Extract the files from the tar file to the CHARON installation directory, subdirectory ‘utils’

  # cd /opt/charon/utils # tar –xf charon_linux_toolkit.kit41kit42.tar .

  .

• In order to activate the ‘menu’ command, execute the following command:

  # ./menusetup

  .

• The setup will check first your terminal settings
  • if set to VT100 you will not be able to continue until you set the TERM value to VT200, dtterm or xterm (see how to here: Configuration)
    
    
• Mandatory packages installation will be checked (telnet, screen, etc..): if one package is missing you will not be able to continue.
  
  
• If telnet is installed, you will be prompted to force the mode to character to avoid some input issues while connected to the guests console
  
  
• Recommended packages installation will be checked (expect, evince, etc...): if one package is missing you will be able to continue, installation of these packages can be done later if needed
  
  
• The 'menu' alias will be created, this will be the command you'll use to access the menu
  
  
• Recursive jobs will be added in the crontab file:
  • if the crontab file does not exist, it will be automatically filled
  • if it already exists, you will be prompted to update it via the selected editor: a check will be performed and the missing entries will be added
    
    
• Alerts parameters will now have to be filled
  • Select between HTML or pure TEXT emails
  • Mail recipients list (used for alerts, not for sending files like log and configuration files for example)
  • Customize emails footer: you can add here your disclaimer, information on CHARON server or any information you think useful
  • Enable/disable wall alert messages
  • Install or update the alert script (can be customized later)

  • Select the alert level from guests log files: 0 = none, 1 = informational+warning+error entries, 2 = warning+error entries, 3 = error entries only

    Div
    class pagebreak

    Example:

    

    .

• When the setup is completed either log out to activate the 'menu' alias or execute the following command:

  # . /etc/profile.d/charon_menu*

  .

...

To upgrade the kit, you will need:

• to read the CHARON Linux Toolkit - Release notes for kit 4142 document

• Copy and extract the files from the tar file to the CHARON installation directory, subdirectory ‘utils'

  # cd /opt/charon/utils # tar –xf charon_linux_toolkit.kit<newkit>.tar .

  .

• You can then run the 'menu' command as usual
  
  

...