Page Comparison

If log rotation is enabled, the log_file_size parameter determines the log file size threshold at which the log is automatically rotated.

• "unlimited" or "0" (default) - the feature is disabled
• "default" - default size is used (4Mb)
• <size>[KMG] - size of the current log file in bytes with additional multipliers:

  • K - Kilobyte - multiply by 1024

  • M - Megabyte - multiply by 1024*1024

  • G - Gigabyte - multiply by 1024*1024*1024

Examples:

 Minimum log file size is 64K, maximum is 1G. Setting size less then 64K effectively makes the log file unlimited.

Specifies what byte sequences received over a virtual serial line triggers a HALT command.

Specify one of the following values: "Crtl-P", "Break" or "none" to disable triggering a HALT condition. The commands are case insensitive.

Example:

The default value is "Break".

This parameter can be specified only for COM1 (OPA0) console

If log rotation is enabled, the log_file_size parameter determines the log file size threshold at which the log is automatically rotated.

• "unlimited" or "0" (default) - the feature is disabled
• "default" - default size is used (4Mb)
• <size>[KMG] - size of the current log file in bytes with additional multipliers:

  • K - Kilobyte - multiply by 1024

  • M - Megabyte - multiply by 1024*1024

  • G - Gigabyte - multiply by 1024*1024*1024

Examples:

 Minimum log file size is 64K, maximum is 1G. Setting size less then 64K effectively makes the log file unlimited.