Page Comparison

...

If a Charon host system is to be used as a router (for example as shown in Example of a More Complex Network Configuration) or  or to provide Internet connectivity to other Charon host and guest systems), it is not sufficient to configure Linux for IP forwarding.

...

1. Create a configuration file (/etc/sysconfig/network-scripts/ifcfg-<interface-name>) for the second interface (if there is no configuration file for the primary interface, create it as well).
2. Set the correct interface for default route in /etc/sysconfig/network (example: GATEWAYDEV=eth0).
3. To prevent the cloud-init from resetting your custom network configurations, add the following lines to the /etc/cloud/cloud.cfg file:
   network:
  ; config: disabled
4. Restart the network.
5. Create an additional routing table (use the command: ip route add <path> dev <interface-name> table <table-id>). There must be an entry for every IP address assigned to the second interface and any other route to be used.
6. Set rules in the Routing Policy Database (use the command: ip rule add from <ip-address-of-second-interface> lookup <table-id>)
7. Create a static route file (/etc/sysconfig/network-scripts/route-<interface-name>)
8. Create a static rule file (/etc/sysconfig/network-scripts/rule-<interface-name>)

...