Page Comparison

...

 To avoid confusion before the instance can be restarted, the new interface can be renamed to its final name using the command 
     ip link set eth0 name ensY && ip link set ensY up

Host to Guest Communication Considerations

...

1. Create a configuration file (/etc/sysconfig/network-scripts/ifcfg-<interface-name>) for the second interface (if there is no configuration file for the primary interface, create it as well).
2. Set the correct interface for default route in /etc/sysconfig/network (example: GATEWAYDEV=eth0).
3. To prevent the cloud-init from resetting your custom network configurations, add the following lines to the /etc/cloud/cloud.cfg file:
   network:
  ; config: disabled
4. Restart the network.
5. Create an additional routing table (use the command: ip route add <path> dev <interface-name> table <table-id>). There must be an entry for every IP address assigned to the second interface and any other route to be used.
6. Set rules in the Routing Policy Database (use the command: ip rule add from <ip-address-of-second-interface> lookup <table-id>)
7. Create a static route file (/etc/sysconfig/network-scripts/route-<interface-name>)
8. Create a static rule file (/etc/sysconfig/network-scripts/rule-<interface-name>)

...