Anchor | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
...
Each peripheral device of CHARON-AXP connects to CHARON-AXP emulated PCI bus with the following configuration parameters:
bus
Parameter | bus | ||||||||
---|---|---|---|---|---|---|---|---|---|
TypeDescription | bus | Text string | |||||||
Value | Value formats:
When specified, the bus configuration parameter tells the CHARON-AXP software the virtual PCI bus to which virtual HP Alpha system shall connect a certain virtual PCI adapter. By default the bus configuration parameter is not specified. If the bus configuration parameter is not specified, CHARON-AXP software connects the virtual PCI adapter to the first available virtual PCI bus. Example (AlphaServer ES40):
Example (AlphaServer GS80):
|
device
Parameter | device | |
---|---|---|
Type | Numeric | |
Value | When specified, the device configuration parameter specifies position of a virtual PCI adapter on virtual PCI bus. By default the device configuration parameter is not specified. If the device configuration parameter is not specified, the CHARON software connects the virtual PCI adapter at the first available position of the virtual PCI bus. Example:
|
function
Parameter | function | |
---|---|---|
Type | Numeric | |
Value | When specified, the function configuration parameter specifies position of a virtual PCI adapter on virtual PCI bus. By default the function configuration parameter is not specified. If the function configuration parameter is not specified, the CHARON software connects the virtual PCI a dapter at the first available position of the virtual PCI bus. Example:
|
irq_bus
Parameter | irq_bus | |
---|---|---|
Type | Text string | |
Value | When specified, the "irq_bus" configuration parameter specifies virtual bus routing interrupt requests from virtual PCI adapter to CHARON-AXP virtual Alpha CPUs. By default the "irq_bus" configuration parameter is not specified. The "irq_bus" configuration parameter must be set to “isa” for AlphaServer 400. For HP Alpha systems other than AlphaServer 400 the "irq_bus" configuration parameter must be left as is (i.e. not specified). Example:
|
irq
Parameter | irq | |
---|---|---|
Type | Numeric | |
Value | When specified, the "irq" configuration parameter assigns interrupt request to the virtual PCI adapter in HP Alpha system. By default the irq configuration parameter is not specified. If the irq configuration parameter is not specified, the CHARON-AXP software uses the correct values depending on the selected PCI position of a virtual PCI adapter. Example:
|
Note that typically all or some of those parameters are specified on loading of some PCI controller in the following way:
...
...
...
Available PCI slots per each HP Alpha model emulated by CHARON-AXP
...
Slot | pci_<N> | device | function | irq | Description | Preloaded Name |
---|---|---|---|---|---|---|
PCI0 (bus=pci_0) | ||||||
- | 0 | 6 | 0 | 11 | NCR 53C810 PCI SCSI Adapter | PKA |
- | 0 | 7 | 0 | - | Intel i82378 PCI ISA Bridge (SATURN) | |
0 | 0 | 11 | 0 | 10 | <option> | |
1 | 0 | 12 | 0 | 15 | <option> | |
2 | 0 | 13 | 0 | 9 | <option> |
...
No support for Multi-Function PCI devices in AlphaServer 400.
Example: Loading DE435 into slot 0:
|
...
The IRQ stands for input line of ASIC interrupt controllers. It has nothing to do with "EISA" style interrupts. So far, the CHARON-AXP emulators do not emulate S3 Trio32/64 Display Adapter. So position of the device 6, function 0 on the PCI 0 remains empty.
Example 1: Loading DE500BA into slot 0:
load DE500BA/dec21x4x EWA bus=pci_0 device=11 function=0 |
Example 2: Loading multiple DE500BA’s into slot 3, populating all 4 functions (gives 4 Ethernet ports):
|
Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4:
|
...
Slot | pci_<N> | device | function | irq | Description | Preloaded Name |
---|---|---|---|---|---|---|
PCI0 (bus=pci_0) | ||||||
- | 0 | 6 | 0 | 12 | NCR 53C810 PCI SCSI Adapter | PKA |
- | 0 | 7 | 0 | - | Intel i82375 PCI EISA Bridge (MERCURY) | |
0 | 0 | 11 | 0 | 0 | <option> | |
1 | 1 | <option>, function 1 | ||||
2 | 2 | <option>, function 2 | ||||
3 | 3 | <option>, function 3 | ||||
1 | 0 | 12 | 0 | 4 | <option> | |
1 | 5 | <option>, function 1 | ||||
2 | 6 | <option>, function 2 | ||||
3 | 7 | <option>, function 3 | ||||
2 | 0 | 13 | 0 | 8 | <option> | |
1 | 9 | <option>, function 1 | ||||
2 | 10 | <option>, function 2 | ||||
3 | 11 | <option>, function 3 |
The IRQ stands for input line of ASIC interrupt controllers. It has nothing to do with "EISA" style interrupts. So far, the CHARON-AXP emulators do not emulate NCR 53C810 PCI SCSI adapter. Instead, emulation of QLOGIC ISP1040B PCI SCSI adapter is used.
Example 1: Loading DE500BA into slot 0:
load DE500BA/dec21x4x EWA bus=pci_0 device=11 function=0 |
Example 2: Loading multiple DE500BA’s into slot 0, populating all 4 functions (gives 4 Ethernet ports):
|
Example 3: Loading mixture of KZPBA and DE500BA into slot 2, populating 2 functions out of 4:
|
...
Slot | pci_<N> | device | function | irq | Description | Preloaded Name |
---|---|---|---|---|---|---|
PCI0 (bus=pci_0) | ||||||
- | 0 | 6 | 0 | - | Intel i82375 PCI EISA Bridge (MERCURY) | |
- | 0 | 7 | 0 | - | DECchip 21050 PCI-to-PCI Bridge) | |
0 | 0 | 11 | 0 | 1 | <option> | |
1 | 2 | <option>, function 1 | ||||
2 | 17 | <option>, function 2 | ||||
3 | 18 | <option>, function 3 | ||||
1 | 0 | 12 | 0 | 2 | <option> | |
1 | 3 | <option>, function 1 | ||||
2 | 19 | <option>, function 2 | ||||
3 | 20 | <option>, function 3 | ||||
2 | 0 | 13 | 0 | 3 | <option> | |
1 | 4 | <option>, function 1 | ||||
2 | 21 | <option>, function 2 | ||||
3 | 22 | <option>, function 3 | ||||
PCI1 (bus=pci_1) | ||||||
- | 1 | 0 | 0 | 0 | NCR 53C810 PCI SCSI Adapter | PKA |
3 | 1 | 1 | 0 | 7 | <option> | |
1 | 8 | <option>, function 1 | ||||
2 | 23 | <option>, function 2 | ||||
3 | 24 | <option>, function 3 | ||||
4 | 1 | 2 | 0 | 9 | <option> | |
1 | 10 | <option>, function 1 | ||||
2 | 25 | <option>, function 2 | ||||
3 | 26 | <option>, function 3 | ||||
5 | 1 | 3 | 0 | 11 | <option> | |
1 | 12 | <option>, function 1 | ||||
2 | 27 | <option>, function 2 | ||||
3 | 28 | <option>, function 3 | ||||
6 | 1 | 4 | 0 | 13 | <option> | |
1 | 14 | <option>, function 1 | ||||
2 | 29 | <option>, function 2 | ||||
3 | 30 | <option>, function 3 |
The IRQ stands for input line of ASIC interrupt controllers. It has nothing to do with "EISA" style interrupts. So far, the CHARON-AXP emulators do not emulate NCR 53C810 PCI SCSI adapter. Instead, emulation of QLOGIC ISP1040B PCI SCSI adapter is used.
Example 1: Loading DE500BA into slot 0:
load DE500BA EWA bus=pci_0 device=11 function=0 |
Example 2: Loading multiple DE500BA’s into slot 0, populating all 4 functions (gives 4 Ethernet ports):
|
Example 3: Loading mixture of KZPBA and DE500BA into slot 3, populating 2 functions out of 4:
|
...
Slot | pci_<N> | device | function | irq | Description | Preloaded Name |
---|---|---|---|---|---|---|
PCI1 (bus=pci_1) | ||||||
- | 1 | 1 | 0 | 4 | NCR 53C810 PCI SCSI Adapter | PKA |
0 | 1 | 2 | 0 | 8 | <option> | |
1 | 9 | <option>, function 1 | ||||
2 | 10 | <option>, function 2 | ||||
3 | 11 | <option>, function 3 | ||||
1 | 1 | 3 | 0 | 12 | <option> | |
1 | 13 | <option>, function 1 | ||||
2 | 14 | <option>, function 2 | ||||
3 | 16 | <option>, function 3 | ||||
2 | 1 | 4 | 0 | 16 | <option> | |
1 | 17 | <option>, function 1 | ||||
2 | 18 | <option>, function 2 | ||||
3 | 19 | <option>, function 3 | ||||
PCI0 (bus=pci_0) | ||||||
- | 0 | 1 | 0 | - | Intel i82375 PCI EISA Bridge (MERCURY) | |
4 | 0 | 2 | 0 | 8 | <option> | |
1 | 9 | <option>, function 1 | ||||
2 | 10 | <option>, function 2 | ||||
3 | 11 | <option>, function 3 | ||||
5 | 0 | 3 | 0 | 12 | <option> | |
1 | 13 | <option>, function 1 | ||||
2 | 14 | <option>, function 2 | ||||
3 | 15 | <option>, function 3 | ||||
6 | 0 | 4 | 0 | 16 | <option> | |
1 | 17 | <option>, function 1 | ||||
2 | 18 | <option>, function 2 | ||||
3 | 19 | <option>, function 3 |
So far, the CHARON-AXP emulators do not emulate NCR 53C810 PCI SCSI adapter. Instead, emulation of QLOGIC ISP1040B PCI SCSI adapter is used.
Example 1: Loading DE500BA into slot 4:
load DE500BA/dec21x4x EWA bus=pci_0 device=2 function=0 |
Example 2: Loading multiple DE500BA’s into slot 4, populating all 4 functions (gives 4 Ethernet ports):
|
Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4:
|
...
Slot | pci_<N> | device | function | irq | Description | Preloaded Name |
---|---|---|---|---|---|---|
PCI0 (bus=pci_0) | ||||||
- | 0 | 0 | 0 | 2 | DEC TULIP PCI Ethernet adapter | EWA |
- | 0 | 1 | 0 | 1 | NCR 53C810 PCI SCSI Adapter | PKA |
- | 0 | 2 | 0 | - | Intel i82375 PCI EISA Bridge (MERCURY) | |
0 | 0 | 6 | 0 | 0 | <option> | |
1 | 24 | <option>, function 1 | ||||
2 | 26 | <option>, function 2 | ||||
3 | 29 | <option>, function 3 | ||||
1 | 0 | 7 | 0 | 4 | <option> | |
1 | 25 | <option>, function 1 | ||||
2 | 27 | <option>, function 2 | ||||
3 | 30 | <option>, function 3 | ||||
2 | 0 | 8 | 0 | 5 | <option> | |
1 | 20 | <option>, function 1 | ||||
2 | 28 | <option>, function 2 | ||||
3 | 31 | <option>, function 3 |
...
So far the CHARON-AXP emulators do not support virtual NCR 53C810 PCI SCSI adapter. Instead, virtual QLOGIC ISP1040B PCI SCSI adapter is used.
Example 1: Loading DE500BA into slot 0:
load DE500BA/dec21x4x EWA bus=pci_0 device=6 function=0 |
Example 2: Loading multiple DE500BA’s into slot 0, populating all 4 functions (gives 4 Ethernet ports):
|
Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4:
|
...
Slot | pci_<N> | device | function | irq | Description | Preloaded Name |
---|---|---|---|---|---|---|
PCI0 (bus=pci_0) | ||||||
- | 0 | 0 | 0 | 2 | DEC TULIP PCI Ethernet adapter | EWA |
- | 0 | 1 | 0 | 1 | NCR 53C810 PCI SCSI Adapter | PKA |
- | 0 | 2 | 0 | - | Intel i82375 PCI EISA Bridge (MERCURY) | |
0 | 0 | 6 | 0 | 0 | <option> | |
1 | 24 | <option>, function 1 | ||||
2 | 26 | <option>, function 2 | ||||
3 | 29 | <option>, function 3 | ||||
1 | 0 | 7 | 0 | 4 | <option> | |
1 | 25 | <option>, function 1 | ||||
2 | 27 | <option>, function 2 | ||||
3 | 30 | <option>, function 3 | ||||
2 | 0 | 8 | 0 | 5 | <option> | |
1 | 20 | <option>, function 1 | ||||
2 | 28 | <option>, function 2 | ||||
3 | 31 | <option>, function 3 |
...
So far the CHARON-AXP emulators do not support virtual NCR 53C810 PCI SCSI adapter. Instead, virtual QLOGIC ISP1040B PCI SCSI adapter is used.
Example 1: Loading DE500BA into slot 0:
load DE500BA/dec21x4x EWA bus=pci_0 device=6 function=0 |
Example 2: Loading multiple DE500BA’s into slot 0, populating all 4 functions (gives 4 Ethernet ports):
|
Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4:
|
...
Slot | pci_<N> | device | function | irq | Description | Preloaded Name |
---|---|---|---|---|---|---|
PCI1 (bus=pci_1) | ||||||
- | 1 | 1 | 0 | 4 | NCR 53C810 PCI SCSI Adapter | PKA |
1 | 1 | 2 | 0 | 8 | <option> | |
1 | 9 | <option>, function 1 | ||||
2 | 10 | <option>, function 2 | ||||
3 | 11 | <option>, function 3 | ||||
2 | 1 | 3 | 0 | 12 | <option> | |
1 | 13 | <option>, function 1 | ||||
2 | 14 | <option>, function 2 | ||||
3 | 15 | <option>, function 3 | ||||
3 | 1 | 4 | 0 | 16 | <option> | |
1 | 17 | <option>, function 1 | ||||
2 | 18 | <option>, function 2 | ||||
3 | 19 | <option>, function 3 | ||||
4 | 1 | 5 | 0 | 20 | <option> | |
1 | 21 | <option>, function 1 | ||||
2 | 22 | <option>, function 2 | ||||
3 | 23 | <option>, function 3 | ||||
PCI0 (bus=pci_0) | ||||||
- | 0 | 1 | 0 | - | Intel i82375 PCI EISA Bridge (MERCURY) | |
5 | 0 | 2 | 0 | 8 | <option> | |
1 | 9 | <option>, function 1 | ||||
2 | 10 | <option>, function 2 | ||||
3 | 11 | <option>, function 3 | ||||
6 | 0 | 3 | 0 | 12 | <option> | |
1 | 13 | <option>, function 1 | ||||
2 | 14 | <option>, function 2 | ||||
3 | 15 | <option>, function 3 | ||||
7 | 0 | 4 | 0 | 16 | <option> | |
1 | 17 | <option>, function 1 | ||||
2 | 18 | <option>, function 2 | ||||
3 | 19 | <option>, function 3 | ||||
8 | 0 | 5 | 0 | 20 | <option> | |
1 | 21 | <option>, function 1 | ||||
2 | 22 | <option>, function 2 | ||||
3 | 23 | <option>, function 3 | ||||
PCI3 (bus=pci_3) | ||||||
9 | 3 | 2 | 0 | 8 | <option> | |
1 | 9 | <option>, function 1 | ||||
2 | 10 | <option>, function 2 | ||||
3 | 11 | <option>, function 3 | ||||
10 | 3 | 3 | 0 | 12 | <option> | |
1 | 13 | <option>, function 1 | ||||
2 | 14 | <option>, function 2 | ||||
3 | 15 | <option>, function 3 | ||||
11 | 3 | 4 | 0 | 16 | <option> | |
1 | 17 | <option>, function 1 | ||||
2 | 18 | <option>, function 2 | ||||
3 | 19 | <option>, function 3 | ||||
12 | 3 | 5 | 0 | 20 | <option> | |
1 | 21 | <option>, function 1 | ||||
2 | 22 | <option>, function 2 | ||||
3 | 23 | <option>, function 3 | ||||
PCI2 (bus=pci_2) | ||||||
13 | 2 | 2 | 0 | 8 | <option> | |
1 | 9 | <option>, function 1 | ||||
2 | 10 | <option>, function 2 | ||||
3 | 11 | <option>, function 3 | ||||
14 | 2 | 3 | 0 | 12 | <option> | |
1 | 13 | <option>, function 1 | ||||
2 | 14 | <option>, function 2 | ||||
3 | 15 | <option>, function 3 | ||||
15 | 2 | 4 | 0 | 16 | <option> | |
1 | 17 | <option>, function 1 | ||||
2 | 18 | <option>, function 2 | ||||
3 | 19 | <option>, function 3 | ||||
16 | 2 | 5 | 0 | 20 | <option> | |
1 | 21 | <option>, function 1 | ||||
2 | 22 | <option>, function 2 | ||||
3 | 23 | <option>, function 3 |
So far the CHARON-AXP emulators do not support virtual NCR 53C810 PCI SCSI adapter. Instead, virtual QLOGIC ISP1040B PCI SCSI adapter is used.
Example 1: Loading DE500BA into slot 4:
load DE500BA/dec21x4x EWA bus=pci_1 device=5 function=0 |
Example 2: Loading multiple DE500BA’s into slot 4, populating all 4 functions (gives 4 Ethernet ports):
|
Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4:
|
...
Slot | pci_<N> | device | function | irq | Description | Preloaded Name |
---|---|---|---|---|---|---|
PCI1 (bus=pci_1) | ||||||
- | 1 | 1 | 0 | 4 | NCR 53C810 PCI SCSI Adapter | PKA |
1 | 1 | 2 | 0 | 8 | <option> | |
1 | 9 | <option>, function 1 | ||||
2 | 10 | <option>, function 2 | ||||
3 | 11 | <option>, function 3 | ||||
2 | 1 | 3 | 0 | 12 | <option> | |
1 | 13 | <option>, function 1 | ||||
2 | 14 | <option>, function 2 | ||||
3 | 15 | <option>, function 3 | ||||
3 | 1 | 4 | 0 | 16 | <option> | |
1 | 17 | <option>, function 1 | ||||
2 | 18 | <option>, function 2 | ||||
3 | 19 | <option>, function 3 | ||||
4 | 1 | 5 | 0 | 20 | <option> | |
1 | 21 | <option>, function 1 | ||||
2 | 22 | <option>, function 2 | ||||
3 | 23 | <option>, function 3 | ||||
PCI0 (bus=pci_0) | ||||||
- | 0 | 1 | 0 | - | Intel i82375 PCI EISA Bridge (MERCURY) | |
5 | 0 | 2 | 0 | 8 | <option> | |
1 | 9 | <option>, function 1 | ||||
2 | 10 | <option>, function 2 | ||||
3 | 11 | <option>, function 3 | ||||
6 | 0 | 3 | 0 | 12 | <option> | |
1 | 13 | <option>, function 1 | ||||
2 | 14 | <option>, function 2 | ||||
3 | 15 | <option>, function 3 | ||||
7 | 0 | 4 | 0 | 16 | <option> | |
1 | 17 | <option>, function 1 | ||||
2 | 18 | <option>, function 2 | ||||
3 | 19 | <option>, function 3 | ||||
8 | 0 | 5 | 0 | 20 | <option> | |
1 | 21 | <option>, function 1 | ||||
2 | 22 | <option>, function 2 | ||||
3 | 23 | <option>, function 3 |
So far the CHARON-AXP emulators do not support virtual NCR 53C810 PCI SCSI adapter. Instead, virtual QLOGIC ISP1040B PCI SCSI adapter is used.
Example 1: Loading DE500BA into slot 4:
load DE500BA/dec21x4x EWA bus=pci_1 device=5 function=0 |
Example 2: Loading multiple DE500BA’s into slot 4, populating all 4 functions (gives 4 Ethernet ports):
|
Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4:
|
...
Slot | pci_<N> | device | function | irq | Description | Preloaded Name |
---|---|---|---|---|---|---|
PCI1 (bus=pci_1) | ||||||
- | 0 | 7 | 0 | - | ALi M1543C PCI ISA bridge | |
- | 0 | 9 | 0 | 29 | DECchip 21143 PCI Ethernet Adapter | EWA |
- | 0 | 11 | 0 | 30 | DECchip 21143 PCI Ethernet Adapter | EWB |
- | 0 | 13 | 0 | - | ALi M1543C PCI IDE/ATAPI controller | DQA, DQB |
1 | 0 | 14 | 0 | 35 | <option> | |
1 | 34 | <option>, function 1 | ||||
2 | 33 | <option>, function 2 | ||||
3 | 32 | <option>, function 3 | ||||
2 | 0 | 15 | 0 | 39 | <option> | |
1 | 38 | <option>, function 1 | ||||
2 | 37 | <option>, function 2 | ||||
3 | 36 | <option>, function 3 | ||||
3 | 0 | 16 | 0 | 43 | <option> | |
1 | 42 | <option>, function 1 | ||||
2 | 41 | <option>, function 2 | ||||
3 | 40 | <option>, function 3 | ||||
4 | 0 | 17 | 0 | 47 | <option> | |
1 | 46 | <option>, function 1 | ||||
2 | 45 | <option>, function 2 | ||||
3 | 44 | <option>, function 3 | ||||
- | 0 | 19 | 0 | 11 | ALi M1543C PCI USB adapter |
Example 1: Loading DE500BA into slot 1:
load DE500BA/dec21x4x EWA bus=pci_0 device=14 function=0 |
Example 2: Loading multiple DE500BA’s into slot 1, populating all 4 functions (gives 4 Ethernet ports):
|
Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4:
|
...
Slot | pci_<N> | device | function | irq | Description | Preloaded Name |
---|---|---|---|---|---|---|
PCI1 (bus=pci_1) | ||||||
- | 0 | 7 | 0 | - | ALi M1543C PCI ISA bridge | |
- | 0 | 9 | 0 | 29 | DECchip 21143 PCI Ethernet Adapter | EWA |
- | 0 | 11 | 0 | 30 | DECchip 21143 PCI Ethernet Adapter | EWB |
- | 0 | 13 | 0 | - | ALi M1543C PCI IDE/ATAPI controller | DQA, DQB |
1 | 0 | 17 | 0 | 47 | <option> | |
1 | 46 | <option>, function 1 | ||||
2 | 45 | <option>, function 2 | ||||
3 | 44 | <option>, function 3 | ||||
- | 0 | 19 | 0 | 11 | ALi M1543C PCI USB adapter |
Example 1: Loading DE500BA into slot 1:
load DE500BA/dec21x4x EWA bus=pci_0 device=17 function=0 |
Example 2: Loading multiple DE500BA’s into slot 1, populating all 4 functions (gives 4 Ethernet ports):
|
Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4:
|
...
Slot | pci_<N> | device | function | irq | Description | Preloaded Name |
---|---|---|---|---|---|---|
PCI0 (bus=pci_0) | ||||||
- | 0 | 7 | 0 | - | ALi M1543C PCI ISA bridge | |
- | 0 | 8 | 0 | - | Adaptec AIC-7899 (channel 0) | PKA |
1 | - | Adaptec AIC-7899 (channel 1) | PKB | |||
- | 0 | 9 | 0 | - | Intel i82559 PCI Ethernet Adapter | EIA (EWA) |
- | 0 | 10 | 0 | - | Intel i82559 PCI Ethernet Adapter | EIB (EWB) |
- | 0 | 13 | 0 | - | ALi M1543C PCI IDE/ATAPI controller | DQA, DQB |
- | 0 | 19 | 0 | - | ALi M1543C PCI USB adapter | |
PCI2 (bus=pci_2) | ||||||
1 | 2 | 7 | 0 | 40 | <option> | |
1 | 41 | <option>, function 1 | ||||
2 | 42 | <option>, function 2 | ||||
3 | 43 | <option>, function 3 | ||||
2 | 2 | 8 | 0 | 36 | <option> | |
1 | 37 | <option>, function 1 | ||||
2 | 38 | <option>, function 2 | ||||
3 | 39 | <option>, function 3 | ||||
3 | 2 | 9 | 0 | 24 | <option> | |
1 | 25 | <option>, function 1 | ||||
2 | 26 | <option>, function 2 | ||||
3 | 27 | <option>, function 3 | ||||
4 | 2 | 10 | 0 | 20 | <option> | |
1 | 21 | <option>, function 1 | ||||
2 | 22 | <option>, function 2 | ||||
3 | 23 | <option>, function 3 |
...
So far the CHARON-AXP emulators do not emulate ALi M1543C PCI USB adapter. So position of the device 19, function 0 on the PCI 0 remains empty.
Example 1: Loading DE500BA into slot 1:
load DE500BA/dec21x4x EWA bus=pci_2 device=7 function=0 |
Example 2: Loading multiple DE500BA’s into slot 2, populating all 4 functions (gives 4 Ethernet ports):
|
Example 3: Loading mixture of KZPBA and DE500BA into slot 3, populating 2 functions out of 4:
|
...
Slot | pci_<N> | device | function | irq | Description | Preloaded Name |
---|---|---|---|---|---|---|
PCI1 (bus=pci_1) | ||||||
4 | 1 | 7 | 0 | 47 | <option> | |
1 | 46 | <option>, function 1 | ||||
2 | 45 | <option>, function 2 | ||||
3 | 44 | <option>, function 3 | ||||
5 | 1 | 8 | 0 | 43 | <option> | |
1 | 42 | <option>, function 1 | ||||
2 | 41 | <option>, function 2 | ||||
3 | 49 | <option>, function 3 | ||||
6 | 1 | 9 | 0 | 39 | <option> | |
1 | 38 | <option>, function 1 | ||||
2 | 37 | <option>, function 2 | ||||
3 | 36 | <option>, function 3 | ||||
PCI0 (bus=pci_0) | ||||||
- | 0 | 5 | 0 | - | ALi M1543C PCI ISA bridge | |
- | 0 | 6 | 0 | 19 | Adaptec AIC-7895 (channel 0) | PKA |
1 | 18 | Adaptec AIC-7895 (channel 1) | PKB | |||
- | 0 | 15 | 0 | - | ALi M1543C PCI IDE/ATAPI controller | DQA, DQB |
- | 0 | 19 | 0 | - | ALi M1543C PCI USB adapter | |
1 | 0 | 7 | 0 | 31 | <option> | |
1 | 30 | <option>, function 1 | ||||
2 | 29 | <option>, function 2 | ||||
3 | 28 | <option>, function 3 | ||||
2 | 0 | 8 | 0 | 27 | <option> | |
1 | 26 | <option>, function 1 | ||||
2 | 25 | <option>, function 2 | ||||
3 | 24 | <option>, function 3 | ||||
3 | 0 | 9 | 0 | 23 | <option> | |
1 | 22 | <option>, function 1 | ||||
2 | 21 | <option>, function 2 | ||||
3 | 20 | <option>, function 3 |
...
So far the CHARON-AXP emulators do not support virtual ALi M1543C PCI USB adapter. So position of the device 19, function 0 on the PCI 0 remains empty
Example 1: Loading DE500BA into slot 4:
load DE500BA/dec21x4x EWA bus=pci_1 device=7 function=0 |
Example 2: Loading multiple DE500BA’s into slot 4, populating all 4 functions (gives 4 Ethernet ports):
|
Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4:
|
...
Slot | pci_<N> | device | function | irq | Description | Preloaded Name |
---|---|---|---|---|---|---|
PCI0 (bus=pci_0) | ||||||
- | 0 | 7 | 0 | - | ALi M1543C PCI ISA bridge | |
- | 0 | 8 | 0 | - | Intel i82559 PCI Ethernet Adapter | EIA (EWA) |
1 | 0 | 9 | 0 | 24 | <option> | |
1 | 25 | <option>, function 1 | ||||
2 | 26 | <option>, function 2 | ||||
3 | 27 | <option>, function 3 | ||||
2 | 0 | 10 | 0 | 12 | <option> | |
1 | 13 | <option>, function 1 | ||||
2 | 14 | <option>, function 2 | ||||
3 | 15 | <option>, function 3 | ||||
- | 0 | 16 | 0 | - | ALi M1543C PCI IDE/ATAPI controller | DQA, DQB |
- | 0 | 19 | 1 | - | ALi M1543C PCI USB adapter | |
PCI1 (bus=pci_1) | ||||||
3 | 1 | 1 | 0 | 28 | <option> | |
1 | 29 | <option>, function 1 | ||||
2 | 30 | <option>, function 2 | ||||
3 | 31 | <option>, function 3 | ||||
4 | 1 | 2 | 0 | 32 | <option> | |
1 | 33 | <option>, function 1 | ||||
2 | 34 | <option>, function 2 | ||||
3 | 35 | <option>, function 3 | ||||
PCI2 (bus=pci_2) | ||||||
- | 2 | 1 | 0 | - | Adaptec AIC-7899 (channel 0) | PKA |
1 | - | Adaptec AIC-7899 (channel 1) | PKB | |||
- | 2 | 5 | 0 | - | BroadCom BCM5703 PCI Ethernet Adapter | EIB (EWB) |
PCI3 (bus=pci_3) | ||||||
5 | 3 | 1 | 0 | 36 | <option> | |
1 | 37 | <option>, function 1 | ||||
2 | 38 | <option>, function 2 | ||||
3 | 39 | <option>, function 3 | ||||
6 | 3 | 2 | 0 | 40 | <option> | |
1 | 41 | <option>, function 1 | ||||
2 | 42 | <option>, function 2 | ||||
3 | 43 | <option>, function 3 |
...
So far the CHARON-AXP emulators do not emulate BroadCom BCM5703. Instead, emulation of DECchip 21143 is used.
Example 1: Loading DE500BA into slot 5:
load DE500BA/dec21x4x EWA bus=pci_3 device=1 function=0 |
Example 2: Loading multiple DE500BA’s into slot 5, populating all 4 functions (gives 4 Ethernet ports):
|
Example 3: Loading mixture of KZPBA and DE500BA into slot 6, populating 2 functions out of 4:
|
...
Slot | pci_<N> | device | function | irq | Description | Preloaded Name |
---|---|---|---|---|---|---|
PCI1 (bus=pci_1) | ||||||
5 | 1 | 1 | 0 | 24 | <option> | |
1 | 25 | <option>, function 1 | ||||
2 | 26 | <option>, function 2 | ||||
3 | 27 | <option>, function 3 | ||||
6 | 1 | 2 | 0 | 28 | <option> | |
1 | 29 | <option>, function 1 | ||||
2 | 30 | <option>, function 2 | ||||
3 | 31 | <option>, function 3 | ||||
7 | 1 | 3 | 0 | 32 | <option> | |
1 | 33 | <option>, function 1 | ||||
2 | 34 | <option>, function 2 | ||||
3 | 35 | <option>, function 3 | ||||
8 | 1 | 4 | 0 | 36 | <option> | |
1 | 37 | <option>, function 1 | ||||
2 | 38 | <option>, function 2 | ||||
3 | 39 | <option>, function 3 | ||||
9 | 1 | 5 | 0 | 40 | <option> | |
1 | 41 | <option>, function 1 | ||||
2 | 42 | <option>, function 2 | ||||
3 | 43 | <option>, function 3 | ||||
10 | 1 | 6 | 0 | 44 | <option> | |
1 | 45 | <option>, function 1 | ||||
2 | 46 | <option>, function 2 | ||||
3 | 47 | <option>, function 3 | ||||
PCI0 (bus=pci_0) | ||||||
1 | 0 | 1 | 0 | 8 | <option> | |
1 | 9 | <option>, function 1 | ||||
2 | 10 | <option>, function 2 | ||||
3 | 11 | <option>, function 3 | ||||
2 | 0 | 2 | 0 | 12 | <option> | |
1 | 13 | <option>, function 1 | ||||
2 | 14 | <option>, function 2 | ||||
3 | 15 | <option>, function 3 | ||||
3 | 0 | 3 | 1 | 16 | <option> | |
1 | 17 | <option>, function 1 | ||||
2 | 18 | <option>, function 2 | ||||
3 | 19 | <option>, function 3 | ||||
4 | 0 | 4 | 0 | 20 | <option> | |
1 | 21 | <option>, function 1 | ||||
2 | 22 | <option>, function 2 | ||||
3 | 23 | <option>, function 3 | ||||
- | 0 | 5 | 0 | - | ALi M1543C PCI ISA bridge | |
- | 0 | 15 | 0 | - | ALi M1543C PCI ISA bridge | DQA, DQB |
- | 0 | 19 | 0 | - | ALi M1543C PCI USB adapter |
...
So far the CHARON-AXP emulators do not support virtual ALi M1543C PCI USB adapter. So position of the device 19, function 0 on the PCI 0 remains empty.
Example 1: Loading DE500BA into slot 5:
load DE500BA/dec21x4x EWA bus=pci_1 device=1 function=0 |
Example 2: Loading multiple DE500BA’s into slot 5, populating all 4 functions (gives 4 Ethernet ports):
|
Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4:
|
...
Slot | pci_<N> | device | function | irq | Description | Preloaded Name |
---|---|---|---|---|---|---|
PCI0 (bus=pci_0) | ||||||
- | 0 | 7 | 0 | - | ALi M1543C PCI ISA bridge | |
1 | 0 | 8 | 0 | 20 | <option> | |
1 | 21 | <option>, function 1 | ||||
2 | 22 | <option>, function 2 | ||||
3 | 23 | <option>, function 3 | ||||
2 | 0 | 9 | 0 | 24 | <option> | |
1 | 25 | <option>, function 1 | ||||
2 | 26 | <option>, function 2 | ||||
3 | 27 | <option>, function 3 | ||||
3 | 0 | 10 | 0 | 12 | <option> | |
1 | 13 | <option>, function 1 | ||||
2 | 14 | <option>, function 2 | ||||
3 | 15 | <option>, function 3 | ||||
4 | 0 | 11 | 0 | 16 | <option> | |
1 | 17 | <option>, function 1 | ||||
2 | 18 | <option>, function 2 | ||||
3 | 19 | <option>, function 3 | ||||
- | 0 | 16 | 0 | - | ALi M1543C PCI IDE/ATAPI controller | DQA, DQB |
- | 0 | 19 | 0 | - | ALi M1543C PCI USB adapter | |
PCI1 (bus=pci_1) | ||||||
5 | 1 | 1 | 0 | 28 | <option> | |
1 | 29 | <option>, function 1 | ||||
2 | 30 | <option>, function 2 | ||||
3 | 31 | <option>, function 3 | ||||
6 | 1 | 2 | 0 | 32 | <option> | |
1 | 33 | <option>, function 1 | ||||
2 | 34 | <option>, function 2 | ||||
3 | 35 | <option>, function 3 | ||||
PCI2 (bus=pci_2) | ||||||
7 | 2 | 1 | 0 | 0 | <option> | |
1 | 1 | <option>, function 1 | ||||
2 | 2 | <option>, function 2 | ||||
3 | 3 | <option>, function 3 | ||||
8 | 2 | 2 | 0 | 4 | <option> | |
1 | 5 | <option>, function 1 | ||||
2 | 6 | <option>, function 2 | ||||
3 | 7 | <option>, function 3 | ||||
PCI3 (bus=pci_3) | ||||||
9 | 3 | 1 | 0 | 36 | <option> | |
1 | 37 | <option>, function 1 | ||||
2 | 38 | <option>, function 2 | ||||
3 | 39 | <option>, function 3 | ||||
10 | 3 | 2 | 0 | 40 | <option> | |
1 | 41 | <option>, function 1 | ||||
2 | 42 | <option>, function 2 | ||||
3 | 43 | <option>, function 3 |
...
So far the CHARON-AXP emulators do not support virtual ALi M1543C PCI USB adapter. So position of the device 19, function 0 on the PCI 0 remains empty.
Example 1: Loading DE500BA into slot 5:
load DE500BA/dec21x4x EWA bus=pci_1 device=1 function=0 |
Example 2: Loading multiple DE500BA’s into slot 5, populating all 4 functions (gives 4 Ethernet ports):
|
Example 3: Loading mixture of KZPBA and DE500BA into slot 1, populating 2 functions out of 4:
|
...
Slot | pci_<N> | device | function | irq | Description | Preloaded Name |
---|---|---|---|---|---|---|
QBB0.PCA0.PCI0 (bus=qbb_0_pca_0_pci_0) | ||||||
0/1 | 0 | 1 | 0 | 36 | QLOGIC ISP1040B PCI SCSI Adapter | PKA |
2 | 0 | 2 | 0 | 40 | <option> | |
3 | 0 | 3 | 0 | 44 | <option> | |
- | 0 | 7 | 0 | - | ALi M1543C PCI ISA bridge | |
- | 0 | 15 | 0 | - | ALi M1543C PCI IDE/ATAPI controller | DQA |
- | 0 | 19 | 0 | - | ALi M1543C PCI USB adapter | |
QBB0.PCA0.PCI1 (bus=qbb_0_pca_0_pci_1) | ||||||
4 | 1 | 4 | 0 | 48 | <option> | |
5 | 1 | 5 | 0 | 52 | <option> | |
6 | 1 | 6 | 0 | 56 | <option> | |
7 | 1 | 7 | 0 | 60 | <option> | |
QBB0.PCA1.PCI0 (bus=qbb_0_pca_1_pci_0) | ||||||
0/1 | 2 | 0 | 0 | 32 | <option> | |
2 | 2 | 2 | 0 | 40 | <option> | |
3 | 2 | 3 | 0 | 44 | <option> | |
QBB0.PCA1.PCI1 (bus=qbb_0_pca_1_pci_1) | ||||||
4 | 3 | 4 | 0 | 48 | <option> | |
5 | 3 | 5 | 0 | 52 | <option> | |
6 | 3 | 6 | 0 | 56 | <option> | |
7 | 3 | 7 | 0 | 60 | <option> | |
QBB1.PCA0.PCI0 (bus=qbb_1_pca_0_pci_0) | ||||||
0/1 | 8 | 0 | 0 | 32 | <option> | |
2 | 8 | 2 | 0 | 40 | <option> | |
3 | 8 | 3 | 0 | 44 | <option> | |
QBB1.PCA0.PCI1 (bus=qbb_1_pca_0_pci_1) | ||||||
4 | 9 | 4 | 0 | 48 | <option> | |
5 | 9 | 5 | 0 | 52 | <option> | |
6 | 9 | 6 | 0 | 56 | <option> | |
7 | 9 | 7 | 0 | 60 | <option> | |
QBB1.PCA1.PCI0 (bus=qbb_1_pca_1_pci_0) | ||||||
0/1 | 10 | 0 | 0 | 32 | <option> | |
2 | 10 | 2 | 0 | 40 | <option> | |
3 | 10 | 3 | 0 | 44 | <option> | |
QBB1.PCA1.PCI1 (bus=qbb_1_pca_1_pci_1) | ||||||
4 | 11 | 4 | 0 | 48 | <option> | |
5 | 11 | 5 | 0 | 52 | <option> | |
6 | 11 | 6 | 0 | 56 | <option> | |
7 | 11 | 7 | 0 | 60 | <option> |
...
Total number of PCI devices configured through CFG file may not exceed 20.
Example: Loading DE500BA into slot 2 of QBB0.PCA0:
load DE500BA/dec21x4x EWA bus=qbb_0_pca_0_pci_0 device=2 function=0 |
...
Slot | pci_<N> | device | function | irq | Description | Preloaded Name |
---|---|---|---|---|---|---|
QBB0.PCA0.PCI0 (bus=qbb_0_pca_0_pci_0) | ||||||
0/1 | 0 | 1 | 0 | 36 | QLOGIC ISP1040B PCI SCSI Adapter | PKA |
2 | 0 | 2 | 0 | 40 | <option> | |
3 | 0 | 3 | 0 | 44 | <option> | |
- | 0 | 7 | 0 | - | ALi M1543C PCI ISA bridge | |
- | 0 | 15 | 0 | - | ALi M1543C PCI IDE/ATAPI controller | DQA |
- | 0 | 19 | 0 | - | ALi M1543C PCI USB adapter | |
QBB0.PCA0.PCI1 (bus=qbb_0_pca_0_pci_1) | ||||||
4 | 1 | 4 | 0 | 48 | <option> | |
5 | 1 | 5 | 0 | 52 | <option> | |
6 | 1 | 6 | 0 | 56 | <option> | |
7 | 1 | 7 | 0 | 60 | <option> | |
QBB0.PCA1.PCI0 (bus=qbb_0_pca_1_pci_0) | ||||||
0/1 | 2 | 0 | 0 | 32 | <option> | |
2 | 2 | 2 | 0 | 40 | <option> | |
3 | 2 | 3 | 0 | 44 | <option> | |
QBB0.PCA1.PCI1 (bus=qbb_0_pca_1_pci_1) | ||||||
4 | 3 | 4 | 0 | 48 | <option> | |
5 | 3 | 5 | 0 | 52 | <option> | |
6 | 3 | 6 | 0 | 56 | <option> | |
7 | 3 | 7 | 0 | 60 | <option> | |
QBB1.PCA0.PCI0 (bus=qbb_1_pca_0_pci_0) | ||||||
0/1 | 8 | 0 | 0 | 32 | <option> | |
2 | 8 | 2 | 0 | 40 | <option> | |
3 | 8 | 3 | 0 | 44 | <option> | |
QBB1.PCA0.PCI1 (bus=qbb_1_pca_0_pci_1) | ||||||
4 | 9 | 4 | 0 | 48 | <option> | |
5 | 9 | 5 | 0 | 52 | <option> | |
6 | 9 | 6 | 0 | 56 | <option> | |
7 | 9 | 7 | 0 | 60 | <option> | |
QBB1.PCA1.PCI0 (bus=qbb_1_pca_1_pci_0) | ||||||
0/1 | 10 | 0 | 0 | 32 | <option> | |
2 | 10 | 2 | 0 | 40 | <option> | |
3 | 10 | 3 | 0 | 44 | <option> | |
QBB1.PCA1.PCI1 (bus=qbb_1_pca_1_pci_1) | ||||||
4 | 11 | 4 | 0 | 48 | <option> | |
5 | 11 | 5 | 0 | 52 | <option> | |
6 | 11 | 6 | 0 | 56 | <option> | |
7 | 11 | 7 | 0 | 60 | <option> | |
QBB2.PCA0.PCI0 (bus=qbb_2_pca_0_pci_0) | ||||||
0/1 | 16 | 0 | 0 | 32 | <option> | |
2 | 16 | 2 | 0 | 40 | <option> | |
3 | 16 | 3 | 0 | 44 | <option> | |
QBB2.PCA0.PCI1 (bus=qbb_2_pca_0_pci_1) | ||||||
4 | 17 | 4 | 0 | 48 | <option> | |
5 | 17 | 5 | 0 | 52 | <option> | |
6 | 17 | 6 | 0 | 56 | <option> | |
7 | 17 | 7 | 0 | 60 | <option> | |
QBB2.PCA1.PCI0 (bus=qbb_2_pca_1_pci_0) | ||||||
0/1 | 18 | 0 | 0 | 32 | <option> | |
2 | 18 | 2 | 0 | 40 | <option> | |
3 | 18 | 3 | 0 | 44 | <option> | |
QBB2.PCA1.PCI1 (bus=qbb_2_pca_1_pci_1) | ||||||
4 | 19 | 4 | 0 | 48 | <option> | |
5 | 19 | 5 | 0 | 52 | <option> | |
6 | 19 | 6 | 0 | 56 | <option> | |
7 | 19 | 7 | 0 | 60 | <option> | |
QBB3.PCA0.PCI0 (bus=qbb_3_pca_0_pci_0) | ||||||
0/1 | 24 | 0 | 0 | 32 | <option> | |
2 | 24 | 2 | 0 | 40 | <option> | |
3 | 24 | 3 | 0 | 44 | <option> | |
QBB3.PCA0.PCI1 (bus=qbb_3_pca_0_pci_1) | ||||||
4 | 25 | 4 | 0 | 48 | <option> | |
5 | 25 | 5 | 0 | 52 | <option> | |
6 | 25 | 6 | 0 | 56 | <option> | |
7 | 25 | 7 | 0 | 60 | <option> | |
QBB3.PCA1.PCI0 (bus=qbb_3_pca_1_pci_0) | ||||||
0/1 | 26 | 0 | 0 | 32 | <option> | |
2 | 26 | 2 | 0 | 40 | <option> | |
3 | 26 | 3 | 0 | 44 | <option> | |
QBB0.PCA0.PCI1 (bus=qbb_0_pca_0_pci_1) | ||||||
4 | 27 | 4 | 0 | 48 | <option> | |
5 | 27 | 5 | 0 | 52 | <option> | |
6 | 27 | 6 | 0 | 56 | <option> | |
7 | 27 | 7 | 0 | 60 | <option> |
...
Total number of PCI devices configured through CFG file may not exceed 20.
Example: Loading DE500BA into slot 2 of QBB0.PCA0:
load DE500BA/dec21x4x EWA bus=qbb_0_pca_0_pci_0 device=2 function=0 |
...
Slot | pci_<N> | device | function | irq | Description | Preloaded Name |
---|---|---|---|---|---|---|
QBB0.PCA0.PCI0 (bus=qbb_0_pca_0_pci_0) | ||||||
0/1 | 0 | 1 | 0 | 36 | QLOGIC ISP1040B PCI SCSI Adapter | PKA |
2 | 0 | 2 | 0 | 40 | <option> | |
3 | 0 | 3 | 0 | 44 | <option> | |
- | 0 | 7 | 0 | - | ALi M1543C PCI ISA bridge | |
- | 0 | 15 | 0 | - | ALi M1543C PCI IDE/ATAPI controller | DQA |
- | 0 | 19 | 0 | - | ALi M1543C PCI USB adapter | |
QBB0.PCA0.PCI1 (bus=qbb_0_pca_0_pci_1) | ||||||
4 | 1 | 4 | 0 | 48 | <option> | |
5 | 1 | 5 | 0 | 52 | <option> | |
6 | 1 | 6 | 0 | 56 | <option> | |
7 | 1 | 7 | 0 | 60 | <option> | |
QBB0.PCA1.PCI0 (bus=qbb_0_pca_1_pci_0) | ||||||
0/1 | 2 | 0 | 0 | 32 | <option> | |
2 | 2 | 2 | 0 | 40 | <option> | |
3 | 2 | 3 | 0 | 44 | <option> | |
QBB0.PCA1.PCI1 (bus=qbb_0_pca_1_pci_1) | ||||||
4 | 3 | 4 | 0 | 48 | <option> | |
5 | 3 | 5 | 0 | 52 | <option> | |
6 | 3 | 6 | 0 | 56 | <option> | |
7 | 3 | 7 | 0 | 60 | <option> | |
QBB1.PCA0.PCI0 (bus=qbb_1_pca_0_pci_0) | ||||||
0/1 | 8 | 0 | 0 | 32 | <option> | |
2 | 8 | 2 | 0 | 40 | <option> | |
3 | 8 | 3 | 0 | 44 | <option> | |
QBB1.PCA0.PCI1 (bus=qbb_1_pca_0_pci_1) | ||||||
4 | 9 | 4 | 0 | 48 | <option> | |
5 | 9 | 5 | 0 | 52 | <option> | |
6 | 9 | 6 | 0 | 56 | <option> | |
7 | 9 | 7 | 0 | 60 | <option> | |
QBB1.PCA1.PCI0 (bus=qbb_1_pca_1_pci_0) | ||||||
0/1 | 10 | 0 | 0 | 32 | <option> | |
2 | 10 | 2 | 0 | 40 | <option> | |
3 | 10 | 3 | 0 | 44 | <option> | |
QBB1.PCA1.PCI1 (bus=qbb_1_pca_1_pci_1) | ||||||
4 | 11 | 4 | 0 | 48 | <option> | |
5 | 11 | 5 | 0 | 52 | <option> | |
6 | 11 | 6 | 0 | 56 | <option> | |
7 | 11 | 7 | 0 | 60 | <option> | |
QBB2.PCA0.PCI0 (bus=qbb_2_pca_0_pci_0) | ||||||
0/1 | 16 | 0 | 0 | 32 | <option> | |
2 | 16 | 2 | 0 | 40 | <option> | |
3 | 16 | 3 | 0 | 44 | <option> | |
QBB2.PCA0.PCI1 (bus=qbb_2_pca_0_pci_1) | ||||||
4 | 17 | 4 | 0 | 48 | <option> | |
5 | 17 | 5 | 0 | 52 | <option> | |
6 | 17 | 6 | 0 | 56 | <option> | |
7 | 17 | 7 | 0 | 60 | <option> | |
QBB2.PCA1.PCI0 (bus=qbb_2_pca_1_pci_0) | ||||||
0/1 | 18 | 0 | 0 | 32 | <option> | |
2 | 18 | 2 | 0 | 40 | <option> | |
3 | 18 | 3 | 0 | 44 | <option> | |
QBB2.PCA1.PCI1 (bus=qbb_2_pca_1_pci_1) | ||||||
4 | 19 | 4 | 0 | 48 | <option> | |
5 | 19 | 5 | 0 | 52 | <option> | |
6 | 19 | 6 | 0 | 56 | <option> | |
7 | 19 | 7 | 0 | 60 | <option> | |
QBB3.PCA0.PCI0 (bus=qbb_3_pca_0_pci_0) | ||||||
0/1 | 24 | 0 | 0 | 32 | <option> | |
2 | 24 | 2 | 0 | 40 | <option> | |
3 | 24 | 3 | 0 | 44 | <option> | |
QBB3.PCA0.PCI1 (bus=qbb_3_pca_0_pci_1) | ||||||
4 | 25 | 4 | 0 | 48 | <option> | |
5 | 25 | 5 | 0 | 52 | <option> | |
6 | 25 | 6 | 0 | 56 | <option> | |
7 | 25 | 7 | 0 | 60 | <option> | |
QBB3.PCA1.PCI0 (bus=qbb_3_pca_1_pci_0) | ||||||
0/1 | 26 | 0 | 0 | 32 | <option> | |
2 | 26 | 2 | 0 | 40 | <option> | |
3 | 26 | 3 | 0 | 44 | <option> | |
QBB3.PCA1.PCI1 (bus=qbb_3_pca_1_pci_1) | ||||||
4 | 27 | 4 | 0 | 48 | <option> | |
5 | 27 | 5 | 0 | 52 | <option> | |
6 | 27 | 6 | 0 | 56 | <option> | |
7 | 27 | 7 | 0 | 60 | <option> | |
QBB4.PCA0.PCI0 (bus=qbb_4_pca_0_pci_0) | ||||||
0/1 | 32 | 0 | 0 | 32 | <option> | |
2 | 32 | 2 | 0 | 40 | <option> | |
3 | 32 | 3 | 0 | 44 | <option> | |
QBB4.PCA0.PCI1 (bus=qbb_4_pca_0_pci_1) | ||||||
4 | 33 | 4 | 0 | 48 | <option> | |
5 | 33 | 5 | 0 | 52 | <option> | |
6 | 33 | 6 | 0 | 56 | <option> | |
7 | 33 | 7 | 0 | 60 | <option> | |
QBB4.PCA1.PCI0 (bus=qbb_4_pca_1_pci_0) | ||||||
0/1 | 34 | 0 | 0 | 32 | <option> | |
2 | 34 | 2 | 0 | 40 | <option> | |
3 | 34 | 3 | 0 | 44 | <option> | |
QBB4.PCA1.PCI1 (bus=qbb_4_pca_1_pci_1) | ||||||
4 | 35 | 4 | 0 | 48 | <option> | |
5 | 35 | 5 | 0 | 52 | <option> | |
6 | 35 | 6 | 0 | 56 | <option> | |
7 | 35 | 7 | 0 | 60 | <option> | |
QBB5.PCA0.PCI0 (bus=qbb_5_pca_0_pci_0) | ||||||
0/1 | 40 | 0 | 0 | 32 | <option> | |
2 | 40 | 2 | 0 | 40 | <option> | |
3 | 40 | 3 | 0 | 44 | <option> | |
QBB5.PCA0.PCI1 (bus=qbb_5_pca_0_pci_1) | ||||||
4 | 41 | 4 | 0 | 48 | <option> | |
5 | 41 | 5 | 0 | 52 | <option> | |
6 | 41 | 6 | 0 | 56 | <option> | |
7 | 41 | 7 | 0 | 60 | <option> | |
QBB5.PCA1.PCI0 (bus=qbb_5_pca_1_pci_0) | ||||||
0/1 | 42 | 0 | 0 | 32 | <option> | |
2 | 42 | 2 | 0 | 40 | <option> | |
3 | 42 | 3 | 0 | 44 | <option> | |
QBB5.PCA1.PCI1 (bus=qbb_5_pca_1_pci_1) | ||||||
4 | 43 | 4 | 0 | 48 | <option> | |
5 | 43 | 5 | 0 | 52 | <option> | |
6 | 43 | 6 | 0 | 56 | <option> | |
7 | 43 | 7 | 0 | 60 | <option> | |
QBB6.PCA0.PCI0 (bus=qbb_6_pca_0_pci_0) | ||||||
0/1 | 48 | 0 | 0 | 32 | <option> | |
2 | 48 | 2 | 0 | 40 | <option> | |
3 | 48 | 3 | 0 | 44 | <option> | |
QBB6.PCA0.PCI1 (bus=qbb_6_pca_0_pci_1) | ||||||
4 | 49 | 4 | 0 | 48 | <option> | |
5 | 49 | 5 | 0 | 52 | <option> | |
6 | 49 | 6 | 0 | 56 | <option> | |
7 | 49 | 7 | 0 | 60 | <option> | |
QBB6.PCA1.PCI0 (bus=qbb_6_pca_1_pci_0) | ||||||
0/1 | 50 | 0 | 0 | 32 | <option> | |
2 | 50 | 2 | 0 | 40 | <option> | |
3 | 50 | 3 | 0 | 44 | <option> | |
QBB6.PCA1.PCI1 (bus=qbb_6_pca_1_pci_1) | ||||||
4 | 51 | 4 | 0 | 48 | <option> | |
5 | 51 | 5 | 0 | 52 | <option> | |
6 | 51 | 6 | 0 | 56 | <option> | |
7 | 51 | 7 | 0 | 60 | <option> | |
QBB7.PCA0.PCI0 (bus=qbb_7_pca_0_pci_0) | ||||||
0/1 | 56 | 0 | 0 | 32 | <option> | |
2 | 56 | 2 | 0 | 40 | <option> | |
3 | 56 | 3 | 0 | 44 | <option> | |
QBB7.PCA0.PCI1 (bus=qbb_7_pca_0_pci_1) | ||||||
4 | 57 | 4 | 0 | 48 | <option> | |
5 | 57 | 5 | 0 | 52 | <option> | |
6 | 57 | 6 | 0 | 56 | <option> | |
7 | 57 | 7 | 0 | 60 | <option> | |
QBB7.PCA1.PCI0 (bus=qbb_7_pca_1_pci_0) | ||||||
0/1 | 58 | 0 | 0 | 32 | <option> | |
2 | 58 | 2 | 0 | 40 | <option> | |
3 | 58 | 3 | 0 | 44 | <option> | |
QBB7.PCA1.PCI1 (bus=qbb_7_pca_1_pci_1) | ||||||
4 | 59 | 4 | 0 | 48 | <option> | |
5 | 59 | 5 | 0 | 52 | <option> | |
6 | 59 | 6 | 0 | 56 | <option> | |
7 | 59 | 7 | 0 | 60 | <option> |
...
Total number of PCI devices configured through CFG file may not exceed 20.
Example: Loading DE500BA into slot 2 of QBB0.PCA0:
load DE500BA/dec21x4x EWA bus=qbb_0_pca_0_pci_0 device=2 function=0 |
...