| Anchor | ||||
|---|---|---|---|---|
|
...
RAM
The CHARON-VAX memory subsystem is permanently loaded and has the logical name "ram".
...
| Parameter | container |
|---|---|
| Type | Text string |
| Value | Specifies the name of a file in which CHARON-VAX stores an intermediate state of its Flash ROM. This state includes, for example, most of the console parameters. By default it is left unspecified.
|
it is recommended to specify the full path to the file
set rom container=”"/path/my_virtual_system.rom”rom" |
...
MicroVAX II, MicroVAX 3600/3900 and VAXserver 3600/3900 The ROM of the MicroVAX II, MicroVAX 3600, MicroVAX 3900, VAXserver 3600 and VAXserver 3900 does not allow the VAX console to accept the command setting "auto-boot". Instead, automatic boot on startup can be specified in the CHARON-VAX configuration file as follows:
bdr boot
Parameter bdr boot Type Text string Value Determines whether the MicroVAX II, MicroVAX 3600, MicroVAX 3900, VAXserver 3600 and VAXserver 3900 boot automatically if correct boot flags are set (and saved in the VAX console files).
The value is: "auto"
Example:
set bdr boot=auto
| Parameter | bdr boot | |
|---|---|---|
| Type | Text string | |
| Value | Determines whether the MicroVAX II, MicroVAX 3600, MicroVAX 3900, VAXserver 3600 and VAXserver 3900 boot automatically if correct boot flags are set (and saved in the VAX console files). The value is: Example:
|
| Warning |
|---|
| Please check that the "toy container" and "rom container" parameters are specified in the configuration file to store the boot flags. |
Back to Table of Contents
| Div | ||
|---|---|---|
| ||
|
VAX66x0
xmi boot
| Parameter | xmi boot | |
|---|---|---|
| Type | Text string | |
| Value | Determines whether the CHARON VAX66x0 startup procedure stops at the ">>>" prompt after self-tests. The values are:
Example:
The value |
| Warning |
|---|
| Please check that the "toy container" and "rom container" parameters are specified in the configuration file to store the boot flags. |
...