...
| Parameter | station_address | |||
|---|---|---|---|---|
| Type | Text String | |||
| Value | "station_address" provides the ability to configure the adapter’s permanent address. By default the adapter’s permanent address is read from the host system’s NIC. Set the "station_address" when you need to configure a satellite (remotely booted) system which will run DECnet or when the migrated software uses the permanent address on the network adapter. Format:
or
Example:
|
| Div | ||
|---|---|---|
| ||
rx_fifo_size
| Parameter | rx_fifo_size |
|---|---|
| Type | Numeric |
| Value | "rx_fifo_size" sets the receive FIFO size. The value is specified in Kb and by default is pre-calculated from the connected port’s size of receive queue. Typically, you do not need to change the "rx_fifo_size" parameter. It is available for extended tuning and bug hunting purposes. |
...
| Parameter | interface |
|---|---|
| Type | Text String |
| Value | Name of corresponding instance of "packet_port" or "tap_port" component |
| Div | ||
|---|---|---|
| ||
station_address
| Parameter | station_address | |||
|---|---|---|---|---|
| Type | Text String | |||
| Value | "station_address" provides the ability to configure the adapter’s permanent address. By default the adapter’s permanent address is read from the host system’s NIC. Set the "station_address" when you need to configure a satellite (remotely booted) system which will run DECnet or when the migrated software uses the permanent address on the network adapter. Format:
or
Example:
|
...
| Include Page | ||||
|---|---|---|---|---|
|
| Div | ||
|---|---|---|
| ||
PMAD-AA TurboChannel Ethernet Adapter
...
| Parameter | station_address | |||
|---|---|---|---|---|
| Type | Text String | |||
| Value | "station_address" provides the ability to configure the adapter’s permanent address. By default the adapter’s permanent address is read from the host system’s NIC. Set the "station_address" when you need to configure a satellite (remotely booted) system which will run DECnet or when the migrated software uses the permanent address on the network adapter. Format:
or
Example:
|
| Div | ||
|---|---|---|
| ||
rx_fifo_size
| Parameter | rx_fifo_size |
|---|---|
| Type | Numeric |
| Value | "rx_fifo_size" sets the receive FIFO size. The value is specified in Kb and by default is pre-calculated from the connected port’s size of receive queue. Typically, you do not need to change the "rx_fifo_size" parameter. It is available for extended tuning and bug hunting purposes. |
...
| Parameter | interface | ||
|---|---|---|---|
| Type | Text string | ||
| Value | This parameter Identifies an Ethernet adapter of the host system dedicated to CHARON-VAX. Syntax:
Example:
|
| Div | ||
|---|---|---|
| ||
port_enable_mac_addr_change
...
| Parameter | port_pending_rx_number | |
|---|---|---|
| Type | Numeric | |
| Value | "port_pending_rx_number" parameter sets the number of pending receive buffers. The default value is 63. The maximum value allowed is 195. You may want to increase the "port_pending_rx_number" when you have very busy networking and experience problems like losing connections not related to the carrier loss. Typically, you do not need to change this parameter. Example:
|
| Div | ||
|---|---|---|
| ||
port_pending_tx_number
| Parameter | port_pending_tx_number | |
|---|---|---|
| Type | Numeric | |
| Value | "port_pending_tx_number" parameter sets the number of buffers the port uses to transmit. The default value is 62. You may want to increase the "port_pending_tx_number" value if the log file indicates dropped TX packets due to TX queue overflow. Typically, you do not need to change this parameter. Example:
|
...
| Parameter | log | ||||
|---|---|---|---|---|---|
| Type | Text string | ||||
| Value | If this parameter is set to some valid file name or a directory where the log files for each individual session will be stored CHARON logs Recv and Xmit packets at the emulated port layer. If an existing directory is specified, CHARON automatically enables creation of individual log files, one for each session using the same scheme as used for the generation of the rotating log files. If the "log" parameter is omitted, CHARON does not create log. In certain situations enabling this parameter may help to detect loss of packets. Example:
|
...
| Info |
|---|
"tap_port" parameters are the same as "packet_port" ones |
...
| Include Page | ||||
|---|---|---|---|---|
|
| Div | ||
|---|---|---|
| ||
Supported Ethernet Q-bus Adapters for DECnet OSI (DECnet Plus)
...