| Anchor | ||||
|---|---|---|---|---|
|
| Include Page | ||||
|---|---|---|---|---|
|
...
CHARON-VAX / CHARON-PDP model | Minimal number of host CPU cores | Recommended number of host CPU cores |
|---|---|---|
VAX 6610 | 2 | 4 |
VAX 6620 | 3 | 4 |
VAX 6630 | 4 | 6 |
VAX 6640 | 6 | 8 |
VAX 6650 | 8 | 12 |
VAX 6660 | 8 | 12 |
| Other models | 2 | 2 |
When starting, the CHARON-VAX software checks the available number of host CPU cores. Currently, this check is based on the maximum number of VAX CPUs that can be emulated, not on the number of the actually configured VAX CPUs. Therefore the number of host CPU cores recommended for the maximum number of emulated CPUs - as shown in the right column of the table above - must be available. If the available number of host CPU cores is below this number, CHARON-VAX will issue a warning message even if the requirements for the configured number of VAX CPUs are fulfilled. The CHARON-VAX software will work despite this warning if the requirements for the configured number of VAX CPUs are fulfilled.
| Note |
|---|
Hyperthreading must be switched off completely. Disable hyperthreading in the BIOS settings of the physical host or, for a VMware virtual machine, edit the virtual machine properties, select the Resources tab then select Advanced CPU. Set the Hyperthreaded Core Sharing mode to None. |
...
| Info |
|---|
Starting with ESXi 6.5, it is not possible to select E1000 adapter when a new virtual machine is created using Windows 10, Windows Server 2012 and 2016 templates. The following workarounds are available:
|
...
| Note |
|---|
All antivirus, screen saver, automatic (scheduled) backup and any other CPU consuming software as well as software that is able to temporarily lock CHARON files (such as automatic indexing) must be turned off, uninstalled and disabled. Alternatively it is also possible to exclude all CHARON executables and material folders from scanning for viruses, but please note that scanning slows down CHARON host anyway - it may be critical for some installations requiring maximum performance. The power scheme must be set to "High Performance" with all the "Sleep" and "Standby" modes turned off. The automatic installation of Microsoft updates must be disabled. MS updates to the CHARON host must be done only in specific service maintainence periods established by the system administrator. Before applying new updates one must shutdown the operating system running on CHARON and stop all the running CHARON instances and services. |
| Note |
|---|
Save boot is not supported by CHARON at the moment since in this case host OS will not accept signature of distributed NDIS drivers needed for CHARON networking. Disable save boot or use CHARON without networking (select "Ignore" when installation procedure reports that NDIS driver is not signed). |
| Div | ||
|---|---|---|
| ||
In case a network-wide license (red dongle or software license) is going to be used, the following operations have to be performed:
...
| Div | ||
|---|---|---|
| ||
Upgrade cases:
| From version | Action |
|---|---|
| 4.7 and below | First uninstall all CHARON products. |
| 4.8 | The version 4.9 can be installed directly.
|
| Include Page | ||||
|---|---|---|---|---|
|
...
Directory | Description |
Build_XXX\x86 (and Build_XXX\x64 on x64 systems) | Contains product executables and libraries |
Drivers | Contains the CHARON drivers |
Chapi | Contains CHARON API files used for creating new emulated devices |
InstallShell | Contains the CHARON installation procedure executables |
Logs | Contains the CHARON installation log |
| Redistributables | Contains the redistributables needed for CHARON running (already installed, except the license alert script) |
| Virtual Machines Manager | Contains the most up-to-date version of CHARON Virtual Machines Manager |
| Virtual Machine Templates | Contains templates for creating CHARON Virtual Machines |
| Virtual Machines | Contains the CHARON Virtual Machines |
| Virtual Disk Images | Contains the CHARON virtual disk images, for example "charoncp012" and "idle_vms_pkg_v3.0" |
...
If a remote license server is to be used:
- Copy the file "
hasp_install\haspdinst.zip" from the CHARON distribution to any directory on the server, for example "C:\Temp". - Extract the content of this archive to the same directory.
- Login as "Administrator" on the server and open "
cmd.exe" from the "Start" menu. - Switch to that directory.
Install the extracted file.
Example:
...> cd c:\tempc:\temp> haspdinst.exe -fr -kp -nomsgc:\temp> haspdinst.exe -install -cm- Copy the file "
hasp_install\hasplib.zip" from the CHARON distribution to any directory on the server, for example "C:\Temp". - Extract the contents of this archive to the same directory.
- Copy the file "
haspvlib_68704.dll" to "C:\Program Files (x86)\Common Files\Aladdin Shared\HASP" (in case of x64 host) or "C:\Program Files\Common Files\Aladdin Shared\HASP" (in case of x86 host) - Connect the network HASP dongle to the server USB port.
...
Software licenses can also be uninstalled using the method, described in the "Removing CHARON-VAX Software Licenses" chapter of this Guide.
For license servers accessible only via non-broadcast search it is also possible to disable access to network licenses if only a local license is to be used: Click on the "Configuration" link to open the "Configuration for Sentinel Manager" page.
Uncheck the "Allow Access to Remote Licenses" checkbox from the "Access to Remote License Managers" tab then press the "Submit" button to apply changes.
...