| Anchor | ||||
|---|---|---|---|---|
|
| Include Page | ||||
|---|---|---|---|---|
|
...
| Table of Contents | ||||
|---|---|---|---|---|
|
Please note: All Linux and HP-UX sample commands in this section are performed as the root user (prompt = #). This may not be necessary for all commands in all environments depending on the local permission settings. The commands can be executed on the Charon host graphical console or via a non-graphical login (e.g., SSH). However, for accessing the running emulator, the use of PuTTY is strongly recommended because it works best with the emulator environment.
The Charon-PAR/PA9-64 functionality of Charon-PAR emulates historic 64-bit PA-RISC hardware. This section shows a sample installation of a 64-bit guest system.
HP-UX ISO Installation Medium
...
| Step | Command | |
|---|---|---|
| 1 | Change to the directory where you store your virtual disks. | # cd /data/Stromasys/host1/Data/Disk/ |
| 2 | Unpack an ISO file contained in a compressed tar archive into this directory (example only: the actual command will vary depending on the location and archive format of your ISO file). | # tar -xzf /path-to-file/HPUX_11v1_Sept2005_FOE.tgz |
...
1. Shut down the guest operating system:
# shutdown -h now
Starting with Charon-PAR version 3.0.5 this will, by default, automatically stop the emulator when it detects that the operating system has been halted. See the system.stop_on_halt parameter in the Configuration File Reference. If the emulator is not stopped automatically, continue with step 2 below.
2. After the guest operating system shutdown is complete, stop the emulator (if it is not stopped automatically after the shutdown of the guest operating system). Different methods must be used for different situations:
...