...
The AlphaServer DS10, AlphaServer DS10L, AlphaServer DS15, AlphaServer 400, AlphaServer 800, AlphaServer 1000 and AlphaServer 1000A has have an additional on-board serial line controller providing a serial line TTA0.
...
load physical_serial_line OPA0 line="/dev/tty0" |
In case of When using the TTA0 console, the mapping looks like that:
...
| Parameter | Type | Description | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| line | Text string | A defined TTY port on host system:
| ||||||||||
| baud | Numeric | Forces the baud rate of the corresponding TTY port to a specified value.The variety of supported values depends on the underlying physical communication resource (TTY port). The most widely used values are: 300, 1200, 9600, 19200, 38400. Example:
| ||||||||||
| break_on | Text string | Specifies what byte sequences received over the physical serial line will trigger a HALT command. This parameter works only for the console line. Specify the following values: "Crtl-P", "Break" or "none" ("none" disables triggering a HALT condition). Example:
| ||||||||||
| stop_on | Text string | Specifies what byte sequences received over the physical serial line will trigger a STOP condition. The STOP condition causes CHARON-AXP to exit. Specify the one of the following values: either “F6” or “none” ("none" disables triggering a STOP condition). Example:
Setting "F6" triggers the STOP condition upon receipt of the " | ||||||||||
| log | Text string | A string specifying a file name to store the content of the console sessions or a directory where the log files for each individual session will be stored. If an existing directory is specified, CHARON-AXP automatically enables creation of individual log files, one for each session using the same scheme as used for the generation of the rotating log files. If the "log" parameter is omitted, CHARON-AXP does not create a console log. Examples:
.
|
...
| Parameter | Type | Description | ||
|---|---|---|---|---|
| host | Text string | A remote host’s IP address or hostname (and optionally a remote TCP/IP port number) for the virtual serial line connection. If omitted, the virtual serial line does not initiate a connection to the remote host and will listen for incoming connection requests. Specify the value in the following form:
If the "<port-no>" is not specified, the virtual serial line uses the TCP/IP port number specified by the "port" parameter (see below). | ||
| port | Numeric | The TCP/IP port number for the virtual serial line. A virtual serial line always listens on this port for incoming connection requests. If multiple virtualized machines are running on a server, ensure the port number is unique across the platform. | ||
| break_on | Text string | Specifies what byte sequences received over a virtual serial line triggers a HALT command. Specify one of the following values: "Crtl-P", "Break" or "none" to disable triggering a HALT condition. The commands are case insensitive. Example:
| ||
| stop_on | Text string | Specifies what byte sequences received over the virtual serial line will trigger a STOP condition. The STOP condition causes CHARON-AXP to exit. Specify one of the following values: either “F6” or “none” ("none" disables triggering a STOP condition). The commands are case insensitive. Example:
| ||
| log | Text string | A string specifying the filename to store the content of the console sessions or a directory where log files for each individual session will be stored. If an existing directory is specified, CHARON-AXP automatically enables the creation of individual log files, one for each session using the same scheme as used for the generation of the rotating log files. If the "log" parameter is omitted, CHARON-AXP does not create any console log. Examples:
|
...