| Anchor | ||||
|---|---|---|---|---|
|
...
The next configuration option taht that can be applied is setting a specific system serial number instead of the default one:
...
Follow this link for details of KZPBA controllers configuration.
Back to Table of Contents
KGPSA-CA PCI FC disk controller
...
Follow this link for details of KGPSA-CA controllers configuration.
Back to Table of Contents
KGPSA-CA mapping to the host resources
...
Numbers in the square brackets represent KGPSA-CA units. They can be in the range 0..32766, but no more than 255 units can be configured on a single controller.
Back to Table of Contents
KGPSA-CA mapping to a storage controller using its "presentation" mode
...
| Type of mapping | Description |
|---|---|
| storage_controller_path_id = <Storage controller path ID> | "Storage controller path ID" is a storage (for example SAN) controller path ID. This ID can be obtained from the special utility "Host Device Check". Once specified, all the disks attached to the storage are automatically mapped as disk units to CHARON-AXP. |
Back to Table of Contents
KGPSA-CA pass through mode
...
| Supported | Not Supported | Not tested |
|---|---|---|
LP8000 | LPe1150 (FC2142SR, A8002A) | LPe11000 |
Back to Table of Contents
| Div | ||
|---|---|---|
| ||
|
FDDI support via DEFPA PCI FDDI controller in "pass through" mode
...
Non-US-EN installations of Windows may present “Location:” string in local language, but "host_bus_location" parameter requires English notation, so the words “PCI”, “bus”, “device”, and “function” must be specified in English.
Back to Table of Contents
| Div | ||
|---|---|---|
| ||
|
Serial lines support via emulated PBXDA-xx family PCI controllers in "pass through" mode
...