...
| Note |
|---|
If the virtual SCSI storage device is attached to a container file the file itself is not removed when the configuration is. |
...
TTYA Configuration
| Anchor | ||||
|---|---|---|---|---|
|
To view or change the current virtual machine console configuration, select COM1(OPA0) TTYA in the Device column of the left-hand pane. This will open the COM1(OPA0)TTYA configuration window, shown below. In this example the console is disabled.
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
It is possible to configure the virtual console device in one of three ways by selecting one of three options described below from the drop-down list labelled Type.
...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
The only option for the physical terminal is Device. This is a drop-down list of all directly attached serial ports available on the host system.
...
The image below shows the network console device configuration window.
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
The following table lists each of the fields in the network console device configuration window and describes their operation.
| Panel | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||
| ||||||||||||||||||
...
TTYB Configuration
To view or change the virtual machine COM2(TTA0) TTYB configuration, select COM2(TTA0)TTYB in the Device column of the left-hand pane.
The virtual COM2 or TTA0 TTYB serial device can be configured as both a physical or network connected device. The configuration of this device is very similar to COM1(OPA0)TTYA. For further details related to configuring this device, consult the section COM1(OPA0) section TTYA Configuration.
Ethernet Configuration
...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
To remove an existing virtual Ethernet adapter, select the adapter from the list of configured devices and click the button labelled Remove...
...