...
Include Page | ||||
---|---|---|---|---|
|
Table of Contents
Table of Contents | ||
---|---|---|
|
General Description
Each peripheral device of CHARON-AXP is connected to its connects to CHARON-AXP emulated PCI bus with the following configuration parameters:
Parameter | Type | Description | |||||
---|---|---|---|---|---|---|---|
bus | Text string | Value format: "pci_<N>" When specified, the bus configuration parameter tells the CHARON-AXP software the virtual PCI bus to which virtual HP Alpha system shall connect a certain virtual PCI adapter. By default the bus configuration parameter is not specified. If the bus configuration parameter is not specified, CHARON-AXP software connects the virtual PCI adapter to the first available virtual PCI bus. Example:
| |||||
device | Numeric | When specified, the device configuration parameter specifies position of a virtual PCI adapter on virtual PCI bus. By default the device configuration parameter is not specified. If the device configuration parameter is not specified, the CHARON software connects the virtual PCI adapter at the first available position of the virtual PCI bus. Example:
| | ||||
function | Numeric | When specified, the function configuration parameter specifies position of a virtual PCI adapter on virtual PCI bus. By default the function configuration parameter is not specified. If the function configuration parameter is not specified, the CHARON software connects the virtual PCI a dapter at the first available position of the virtual PCI bus. Example:
| |||||
irq_bus | Text string | When specified, the "irq_bus" configuration parameter specifies virtual bus routing interrupt requests from virtual PCI adapter to CHARON-AXP virtual Alpha CPUs. By default the "irq_bus" configuration parameter is not specified. The "irq_bus" configuration parameter must be set to “isa” for AlphaServer 400. For HP Alpha systems other than AlphaServer 400 the "irq_bus" configuration parameter must be left as is (i.e. not specified). Example:
| |||||
irq | Numeric | When specified, the "irq" configuration parameter assigns interrupt request to the virtual PCI adapter in HP Alpha system. By default the irq configuration parameter is not specified. If the irq configuration parameter is not specified, the CHARON-AXP software uses the correct values depending on the selected PCI position of a virtual PCI adapter. Example:
|
Note that typically all or some of those parameters are specified on loading of some PCI controller in the following way:
load KZPBA PKA bus=pci_1 device=1 function=0 irq_bus=isa irq=24 |