Versions Compared

Old Version 9

changes.mady.by.user Bruno Miretti

Saved on

compared with

New Version Current

changes.mady.by.user Bruno Miretti

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Update for PDF export

...

(info) If the "lsscsi" command is not installed on your system, use "yum install lsscsi" to make it available. If you cannot install "lsscsi", use method 2 or method 3 described below.

Output example1:

[0:0:0:0]    disk    VMware   Virtual disk     1.0   /dev/sda   /dev/sg0
[0:0:10:0]   tape    COMPAQ   SDLT320          5F5F  /dev/st0   /dev/sg9
[0:0:11:0]   tape    COMPAQ   SDLT320          5F5F  /dev/st1   /dev/sg10
[0:0:12:0]   mediumx COMPAQ   MSL5000 Series   0520  /dev/sch0  /dev/sg11

Output example2:

[0:0:0:0]    disk    VMware,  VMware Virtual S 1.0   /dev/sda   /dev/sg0
[4:0:0:0]    cd/dvd  NECVMWar VMware SATA CD01 1.00  /dev/sr0   /dev/sg1

Include Page
KBCOMMON:DOC-GoToToc
KBCOMMON:DOC-GoToToc

...

Open a terminal console and issue:

# cat /proc/scsi/sg/device_hdr; cat /proc/scsi/sg/devices

Output example:

host    chan    id      lun     type    opens   qdepth  bus    online
4       0       0       0       5       1       1       0      1
5       0       0       0       0       1       1       0      1

The fifth column ("type") value has the following correspondence:

...

On a freshly booted system, issue the following command:

# dmesg | grep sg

The output will look like that:

[ 1.503622] sr 4:0:0:0: Attached scsi generic sg0 type 5
[ 1.780897] sd 5:0:0:0: Attached scsi generic sg1 type 0

(warning) This table lists all the devices, not only the real SCSI ones (SATA/IDE for example). CHARON supports only real SCSI devices.

...