...
Specify the interface to dedicate to CHARON:eth1
Turning off offloading for eth1.. Please wait
select action:
1 - Dedicate to CHARON
2 - Release to host
3 - Create Bridge with TAPs
4 - Remove Bridge
5 - Add VLAN
6 - Remove VLAN
7 - Print status
6 8 - Exit :> 5 7
|
Now the interface "eth1" is dedicated to CHARON-AXP:
Interfaces Dedicated to State
---------- ------------ ------------
eth0 host connected to host
eth1 CHARON disconnected from host
lo host unmanaged from host
================================================================= =
bridge name bridge id STP enabled interfacesselect action:
1 - Dedicate to CHARON
2 - Release to host
3 - Create Bridge with TAPs
4 - Remove Bridge
5 - Print status
6 - Exit
|
Enter "6" to return to console prompt.
Now "eth1" can be used by CHARON-AXP.
Back to Table of Contents
Release of a host physical interface back to host
Login as root and enter "ncu". The following menu will appear:
# ncu
CHARON Network Configuration Utility, STROMASYS (c) 2015 Version 1.5
Interfaces Dedicated to State
---------- ------------ ------------
eth0 host connected to host
eth1 CHARON disconnected from host
lo host unmanaged from host name bridge id STP enabled interfaces
========================== VLAN =================================
================================================================= select action:
1 - Dedicate to CHARON
2 - Release to host
3 - Create Bridge with TAPs
4 - Remove Bridge
5 - Add VLAN
6 - Remove VLAN
7 - Print status
8 - Exit |
Enter "8" to return to console prompt.
Now "eth1" can be used by CHARON-AXP.
Back to Table of Contents
Release of a host physical interface back to host
Login as root and enter "ncu". The following menu will appear:
# ncu
CHARON Network Configuration Utility, STROMASYS (c) 2016 Version 1.6
Interfaces Dedicated to State
---------- ------------ ------------
eth0 host connected to host
eth1 CHARON disconnected from host
lo host unmanaged from host
=================================================================
bridge name bridge id STP enabled interfaces
========================== VLAN =================================
================================================================= =
bridge name bridge id STP enabled interfacesselect action:
1 - Dedicate to CHARON
2 - Release to host
3 - Create Bridge with TAPs
4 - Remove Bridge
5 - Print status
6 - Bridge with TAPs
4 - Remove Bridge
5 - Add VLAN
6 - Remove VLAN
7 - Print status
8 - Exit :> 2
|
Let's say that we want to return the interface "eth1" (currently dedicated to CHARON) back to host. To do that enter "2" then "eth1":
Specify the interface to release to HOST:eth1
Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/3)
select action:
1 - Dedicate to CHARON
2 - Release to host
3 - Create Bridge with TAPs
4 - Remove Bridge
5 - Add VLAN
6 - Remove VLAN
7 - Print status
6 8 - Exit :> 6 8
|
Enter "68" to quit the "ncu" utility.
...