| Include Page |
|---|
| KBCOMMON:KB-CSSstyle |
|---|
| KBCOMMON:KB-CSSstyle |
|---|
|
...
| Include Page |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
|
Configuration parameters
The PBXDA serial lines adapter emulation has the following configuration parameters:
port
| Parameter | port |
|---|
| Type | Text String |
|---|
| Value | Specifies a local port for incoming telnet connections By default the "port" configuration option is not specified. Syntax: port[line-number]=<local port> |
Example:
|
|---|
line
| Parameter | line |
|---|
| Type | Text string |
|---|
| Value | A defined TTY port on host system: | Syntax | Description |
|---|
| "/dev/tty<N>" | Virtual serial linesconsole | | "/dev/ttyS<N>" | Onboard serial lines | | "/dev/ttyUSB<N>" | Modem or USB serial lines adapters | | "/dev/tty<XXX>" | Proprietary (depending on a driver) devices such as DIGI or MOXA cards |
Example: set TXA line[2]="/dev/ttyS1"
| Note |
|---|
If a virtual console "/dev/tty<N>" is going to be used, it must be freed from all the processes running on it at first. Refer to your OS documentation for details, also some description on how to do it is available here. |
| Note |
|---|
A specific account for running CHARON ("charon") does not allow usage of physical consoles "/dev/tty<N>" as CHARON consoles. If you plan to map CHARON console to "/dev/tty<N>" use only "root" account for CHARON running. |
|
|---|
| Include Page |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
|
"ttyY" notation specifics
Note that the "ttyY" notation can have different forms depending on the nature of the device used:
| Mapping | Type | Commentary |
|---|
"/dev/tty<N>" where N is from 0 to 11 | Linux virtual tty | Those tty devices must be free from the Linux "getty/mgetty" and similar programs (specified in "/etc/inittab") Example:
|
"/dev/ttyS<N>" where N is a number | Onboard serial lines | Example:
|
"/dev/tty<XXX>" where XXX is a complex letter/number notation | Proprietary (depending on a driver) devices | Example for a first port of a MOXA card: Example for a first port of a DIGI card:
|
"/dev/ttyUSB<N>" where N is a number | Modem or USB serial lines adapters | Example:
|
| Include Page |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
|