...

Please note: All Linux and HP-UX sample commands in this section are performed as the root user (prompt = #). This may not be necessary for all commands in all environments depending on the local permission settings. The commands can be executed on the Charon host graphical console or via a non-graphical login (e.g., SSH). However, for accessing the running emulator, the use of PuTTY is strongly recommended because it works best with the emulator environment.

The Charon-PAR/PA9-32 functionality of Charon-PAR emulates historic 32-bit PA-RISC hardware. This section shows a sample installation of a 32-bit guest system.

Emulator Licensing Considerations

HP-UX ISO Installation Medium 

...

Please note: The examples in this section assume that a graphical interface is used, on which a PuTTY session can be run. Should this not be possible, you can access the console of the emulated system by using, for example, a telnet client and pointing it to the TCP port on the Charon host defined for the serial console port in the configuration file. The default port is 30000 (sample ,

Sample command to connect to an emulator on the local system:

$ telnet localhost 30000).

In this case, do not start the PuTTY program automatically from the emulator configuration.

...