...

Please note: All Linux and HP-UX sample commands in this section are performed as the root user (prompt = #). This may not be necessary for all commands in all environments depending on the local permission settings. The commands can be executed on the Charon host graphical console or via a non-graphical login (e.g., SSH). However, for accessing the running emulator, the use of PuTTY is strongly recommended because it works best with the emulator environment.

The Charon-PAR/PA9-32 functionality of Charon-PAR emulates historic 32-bit PA-RISC hardware. This section shows a sample installation of a 32-bit guest system.

Emulator Licensing Considerations

HP-UX ISO Installation Medium 

...

Starting with Charon-PAR version 3.0.5 this will, by default, automatically stop the emulator when it detects that the operating system has been halted. See the system.stop_on_halt parameter in the Configuration File Reference. If the emulator is not stopped automatically, continue with step 2 below.

2. After Starting with version 3.0.5, the emulator is stopped automatically after the guest operating system shutdown is complete , stop the emulator (if it (unless the configuration parameter system.stop_on_halt has been set to false). If the emulator is not stopped automatically after the shutdown of the guest operating system). Different , different methods must be used for to stop it in different situations:

• The emulator was started in interactive mode and the Charon-PAR console is available in current terminal: enter the exit command at thepa9-32>prompt and hit Enter. This will cause the emulator to close the disk images of the emulated system and to exit.
• The Charon-PAR console is available on a local TCP port (emulator started with -c or --console-port parameter): this situation will exist most frequently if the emulator has been started as a daemon or service. To stop the emulator access the Charon-PAR console via telnet to localhost on the port specified when starting the emulator, enter the exit command at the pa9-32> prompt, and hit Enter.
  Access to the Charon-PAR console via a TCP port is available starting with Charon-PAR version 3.0.1. The CTRL+B key combination has been disabled on the emulator console starting with this version.

...