Versions Compared

Old Version 76

changes.mady.by.user W.Erber

Saved on

compared with

New Version 77

changes.mady.by.user W.Erber

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Anchor
TOC
TOC
Include Page
KBCOMMON:KB-CSSstyle
KBCOMMON:KB-CSSstyle

...

Comments in the file are preceded by the # character.

Please note that some entries require an equal-sign (=) and for other parameters an equal-sign is not allowed. The emulator will not start if a required equal-sign is missing or an equal-sign is placed where it is not permitted.

If a parameter value is a string, it must be enclosed in double quotes.

...

Parameter license_key_id 

Optional parameter. There can be several license_key_id parameters in this section. They define a prioritized list of license keys. The first entry has the highest priority. If no key with this ID is available, the next key in the list will be tried. If a higher priority key becomes available, the emulator will switch to this license at the next periodic license check.

Syntax:

license_key_id "key-id-prio1"

...

Optional parameter. There can be several license_id parameters in this section. They define a prioritized list of product license IDs. The first entry has the highest priority. If no key with this product license ID is available, the next product license ID in the list will be attempted. If a higher priority license becomes available, the emulator will switch to this license at the next periodic license check.

Syntax:

license_id "lic-id-prio1"

...

Serial port option
Description
type

The serial port type determines the protocol used on the serial port. Possible values are:

  • socket: the port is set to telnet raw mode.
  • telnet: the port supports the telnet protocol.
  • device: indicates that the emulated serial line is connected to a physical terminal on the host.
port

Each port is mapped to a TCP socket on the emulator host or to a physical line. This parameter defines the TCP port used or the name of the physical device. A TCP port number must be unique on the host system.

A TCP port number is specified as "<where-to-listen>:<portnumber>". It requires a port type of socket or telnet.

Possible values for where-to-listen:

  • Empty:
    • If the port number is specified without a colon (:), the console will only be accessible on the localhost address. Equivalent lo:<portnumber>.
    • If the port number is specified with a colon, the console process will listen on all host interfaces.
  • Interface name: the console process will only listen on the specified host interface.
  • IP address: the console process will only listen on host IP address.

Default values:

  • ":30000" for line 1
  • ":30002" for line 2

A physical device is specified as "<device-file>". It requires a port type of device.

Example:

  • "/dev/ttyS0"
  • "/dev/ttyUSB0"
commandThis parameter is optional. It can be used to specify a terminal emulation program that is started automatically when the emulated system is started. Charon-PAR provides preconfigured profiles for PuTTY (HPA-Socket HPA-Telnet HPA-Telnet-VT100) that can be used to connect to the emulated system via a serial line.

...