...
To select the correct image, select Change Image Source. This will allow you to browse the different available categories.
The image below shows an example of the image selection screen (choose a supported Linux version or - if appropriate - a prepackaged Charon-SSP VE marketplace image):
Selecting the Optionally, change the compartment. Select the correct image and confirming confirm your selection by clicking on Select Image at the bottom of the page. This will take you back to the Create Compute Instance window.
...
Step 4: on in the middle part of the Create Compute Instance window, select the appropriate shape (i.e., the virtual Linux Charon host hardware), the subnet membership of the instance and whether to assign a public IP address. If required, you can also create a new virtual cloud network or a new subnet here.
To select an appropriate shape conforming to the hardware requirements of the emulated SPARC system, click on Change Shape.
...
This will open a window where you can select the correct system type.
...
Step 5: on the bottom of the Create Compute Instance window create a new SSH key-pair or upload the public SSH key of an existing key-pair that you will use to access your instance. If you create a new key-pair, you must download the private key and store it in a save place for later use. You can also download the public key.
Step 6 (starting with Charon-SSP marketplace images version 4.2.2 and VE license server 1.0.33): require an IMDSv2 authorization header for applications relying in the IMDS service. For this, open the additional options by clicking on Show Advanced Options at the bottom of the instance creation page, select the Management tab, and activate the authorization header, as shown below:
On existing instances, this parameter can be changed, by editing the instance metadata service settings for the instance (go to Instance Details and click on Edit in the line Instance Metadata Service).
Step 7: Click on Create to create your instance.
Step 68: verify your instance is running.
Your instance should now be visible in the list of compute instances.
...
Initial Access to the Instance
...