Page Comparison

...

• Intel x86-64 hardware platform
• At least 3GHz, 3.4GHz or higher is recommended
• SSE 4.2 and FMA required
• CPU cores required:
  • at least one CPU core for the host operating system, and
  • at least 2 cores per emulated CPU (3 cores for future advanced DIT)
• RAM requirements:
  • 4GB RAM plus 1.1 times the emulated RAM size
  • at least 24GB RAM for N4000 models
• One Ethernet interface for the host system and one Ethernet interface for each emulated Ethernet NIC. Please note that currently TAP interfaces (virtual bridge on Linux) are not supported.
• At least one available USB port if hardware licenses are to be used.

 If Please note:

• If the host CPU does not support the required extensions, the emulator will not start. Instead, it will stop with an error message indicating the missing features.

...

• To identify the capabilities of the host system CPU, use one of the following commands: lscpu or cat /proc/cpuinfo.

Software Prerequisites

...

• Red Hat 7.x (64-bit) starting with 7.4
• CentOS 7.x (64-bit) starting with 7.4

 General General limitation: do not hibernate or suspend the host system while Charon-PAR instances are active.

Other Host Software Prerequisites

The license driver package requires the 32-bit glibc package. This is available in the standard CentOS and Red Hat repositories. Sometimes it is not possible to use an online repository for the installation of 32-bit glibc package. In this case the procedure described in How to install the glibc.i686 package without an Internet connection can be used.

On RHEL 7.x and CentOS 7.x, the libev package is required. If it is reported as missing during the Charon installation on RHEL 7.x check that the repository extras is included and enabled, if not, include and enable it. Please refer to your Linux distribution administrator's guide. Example for RHEL 7.x:

# yum-config-manager --enable rhel-7-server-extras-rpms

Supported Hypervisors

...

• VMware ESXi 5.5 and 6.x up to 6.7

 Using Please note: Using the VMware vSphere Hypervisor (ESXi) to dynamically move an active Charon-PAR instance to a different server is not supported (vMotion). In particular, moving to a system that does not have identical hardware (including clock speed) will cause problems.

...

Without the presence of a valid license key, the emulated system will not start. Should the license become invalid or be removed during operation, the emulated system will stop after a grace period. The lengths of this grace period depends on the version of the Charon-PAR software and the license configuration.

In a virtualized or cloud environment, there are additional challenges for user-friendly and stable product licensing. For such environments, please contact Stromasys or your Stromasys VAR to discuss the best option for your requirements.

...

• HP-UX 11v1 (11.11) and 11v2 (11.23)
• In addition, emulated systems configured with 360 and 440 MHz CPUs can also run HP-UX 11.00 (e.g., rp2400-1-360, rp2400-1-440, rp7400-1-440, etc.)

The 7000-720 32-bit model supports only HP-UX 9.07.

Currently supported Charon-PAR/PA3 guest system versions:

...