...
- Only one such module can be loaded in the configuration.
- The slot number in the load command is not the same as the slot numbers used to indicate free PCI IO expansion slots where, for example, an additional SCSI adapter can be loaded. Instead, it indicates the position of the module on the bus.
- The usable bus number and slot numbers depend on the emulated model and the already loaded devices.
- Important: take care to always use a slot-number higher than the one where the console line has been loaded. Otherwise, HP-UX may mistakenly configure the SuperIO serial line as the system console and the system boot will fail.
| Div | ||
|---|---|---|
| ||
Configuring the Devices
Serial Lines
...