| Include Page |
|---|
| KBCOMMON:KB-CSSstyle |
|---|
| KBCOMMON:KB-CSSstyle |
|---|
|
...
In some emulator products it is possible to configure the number of retries and the waiting time between them by adding parameters to the emulator configuration file. Please refer to the product documentation for the details regarding the relevant parameters: license_retry_period and license_retry_count parameters (obsolete starting with version 1.10)
2. At regular intervals during the runtime of the emulator (the default license check period of 1 hour can be changed by Stromasys using the appropriate license parameters):
...
| Excerpt |
|---|
A software license is a "virtual" key with functionality very similar to a HASP network-enabled hardware dongle. A software license does not require any special hardware but it still requires installation of the Sentinel runtime environment. | Note |
|---|
To avoid unexpected problems, do not use any Sentinel runtime software that was not provided by Stromasys without being advised to do so by your Stromasys representative. |
| Note |
|---|
Software licenses are best suited for stable environments, because their correct function depends on certain characteristics of the host system. Changing any of these characteristics will invalidate the license. - If the Charon host runs on real hardware, software licenses are by default tightly bound to the hardware for which they were issued. If major hardware characteristics of the system are changed, the license will be disabled.
- If the Charon host runs in a virtual environment (e.g., VMware), software licenses are normally bound to the virtual machine ID and a set of additional characteristics of the virtual machine. If any of these parameters are changed, the license will be disabled.
For a more detailed description of the restrictions, please refer to Software Licensing restrictions or contact your Stromasys representative. |
| Warning |
|---|
Software licenses are very sensitive to even small changes on the host system. Therefore, it is especially important to provide for a backup license that will ensure continued operation should there be a problem with the software license. See Handling Multiple License Keys and Product Licenses for details. |
|
...
Step | Description |
|---|
| 1 | Open a web browser and navigate to http://localhost:1947/. |
| 2 | Click on the left-hand menu item labeled Configuration. |
| 3 | Click on the Basic Settings tab. |
| 4 | Under the entry labeled Password Protection, click the Change Password button. |
| 5 | At the Change Password window: - Leave the Current Admin Password field blank (there is no password set by default).
- Enter the desired password into the New Admin Password field.
- Repeat the desired password in the Re-enter new Admin Password field.
- Click the Submit button.
|
| 6 | Back at the Basic Settings tab: - Under the section labeled Password Protection, select the All ACC Pages radio button.
- Click the Submit button to save this change.
|
| 7 | Optional: to allow remote access to the Sentinel HASP GUI: - Click the Basic Settings tab.
- Select the Allow Remote Access to ACC check box.
- Click the Submit button.
| Note |
|---|
For remote access to the Sentinel HASP GUI, - the firewall must permit access to port 1947/TCP, and
- network visibility on the ACC network configuration tab must be set to All Network Adapters.
If required, remote access can also be enabled on Linux by editing the file /etc/hasplm/hasplm.ini and setting the parameter ACCremote to 1. Should the file not yet exist, refer to the Sentinel ACC selected hasplm.ini parameters chapter in the Tools Reference section of the licensing handbook. |
|
| Info |
|---|
With these settings, when you connect to the HASP GUI from a remote system, you may be prompted for a username and password. It is enough to just enter the configured password and leave the username field empty. |
...