Page Comparison

...

Select the interface to be released back to the host (in the example below it's name is "Charon"), press the "Release adapter to HOST" button:

Press the "Next" button and review the log of this operation:

...

In the example below, there is an issue with the host TCP/IP being enabled on the CHARON interface. Review the problem description, press the select "Fix the adapter configuration" then press the "Next" buttonsbutton.

The utility will fix any issues and report a good status for the interface. Press the "Next" button, the following dialog will appear:

...

Select "Show detailed log" for more detail.

Press the "Finish" button to exit.

Back to Table of Contents

...

The Network Control Center is able to disable "offload" parameters for CHARON. It is highly recommended to disabel disable them to avoid any problems with TCP/IP networking under CHARON.

Start the utility and select "Disable TCP chimney offload for CHARON"; press the "Next" button:

The "offload" parameters will be reset for all CHARON emulators (executable files).

Press the "Finish" button to exit.

 Please note to restart the CHARON host to enable this settings.

Back to Table of Contents

...

The Network Control Center is able to monitor CHARON network activity. This function is available only if CHARON is running.

Start the utility and , select "Monitor CHARON NIC activity" ; and press the "Next" button:

Select the network interface to monitor (it must be dedicated to CHARON); press the "Next" button:

The utility will display statistics updated in a real time. Note , it is possible to record the statistics in a log file with a selected write interval.

Press the "Next" button to stop the recording and to see the log of this operation:

...

Select "Show detailed log" for more detail.

Press the "Finish" button to exit.

Back to Table of Contents

...