Page Comparison

...

The "Network Control Center" utility is used to configure, verify dedicated network interfaces and trace network activity for a CHARON network.

To start the utility click on the Open CHARON Virtual Machines Manager, switch to the "Host Information & Utilities" tab and press the "Network Control Center" button at the "Host Information & Utilities" tab of CHARON Virtual Machines Manager:

Back to Table of Contents

...

When it is needed to install a modified driver, use the following procedure. Select "Install/Upgrade" and press the "Next" button:

Select "Install/Upgrade CHARON NDIS driver" checkbox and press the "Select" button:

Press the "Browse" button:

Browse for the target "sripacket.inf" file (by default it is located in the "C:\Program Files\CHARON\Drivers\NDIS6_X.X.X.XXXXX" directory), select it and press the "Open" button:

If the CHARON network driver has been acquired directly from STROMASYS, put it in a temporary directory and choose the "sripacket.inf" file from this directory in the dialog above.

Review the version of the driver and, if it is correct, press the "Ok" button:

The Network Control Center will display the previous dialog with the path to the CHARON network driver. Press the "Next"  in button in the popup below to continue:

...

The utility will begin the CHARON network driver installation. If Windows Security asks you to confirm the driver installation, press the "Install" button:

The driver installation will resume:

...

Review the log, make sure it is correct. Save the log to a file by pressing pressing the "Save Log in file" button in case the log file has to be sent to Stromasys Customer Support.

Select "Show detailed log" to display more detail.

Press the "Finish" button to exit.

Back to Table of Contents

...

Start the utility and select "Install/Upgrade"; press the "Next" button:

Select "Remove all CHARON Network Drivers" and press the "Next" button:

The utility will report that the CHARON drivers have been removed:

...

Review the log for errors. Save the log to a file by pressing the "Save Log in file"  in button in case the log file has to be sent to Stromasys Customer Support.

...

Select "Show detailed log" to display more detail.

Press the "Finish" button to exit.

Back to Table of Contents

...

Start the utility and select "Configure NIC"; press the "Next" button:

Select the host interface to be dedicated to CHARON (in the example below it's name is "Charon"), press the "Dedicate adapter to CHARON" button:

Install and configure VLAN adapters, according to the vendor's User's Guide, if required. Select the VLAN adapter in the dialog box in the above example. A VLAN adapter is not configured differently, the same procedure should be followed.

...

The Network Control Center will dedicate the selected adapter to CHARON. Press the "Next" button.

The next dialog helps to define the correct lines for the CHARON configuration file. Select the target emulated network adapter and press the "Copy suggestions to clipboard" button:

It is possible to paste the content of the clipboard to the CHARON configuration file as shown in the example below:

Press the "Next" button to see the log file:

Review the log for errors. Save the log to a file by pressing the "Save Log in file"  in button in case the log file has to be sent to Stromasys Customer Support.

Select "Show detailed log" to display more detail.

Press the "Finish" button to exit.

Back to Table of Contents

...

Start the utility and select "Configure NIC"; press the "Next" button:

Select the interface to be released back to the host (in the example below it's name is "Charon"), press the "Release adapter to HOST" button:

Press the "Next" button and review the log of this operation:

...

Select "Show detailed log" to display more detail.

Press the "Finish" button to exit.

Back to Table of Contents

...

Start the utility and select "Troubleshoot NIC dedicated for CHARON"; press the "Next" button:

Select the target interface and press the "Next" button:

Review the status of the interface:

...

In the example below, there is an issue with the host TCP/IP being enabled on the CHARON interface. Review the problem description, press the "Fix the adapter configuration" and press then the "Next" buttons.

The utility will fix any issues and report a good status for the interface. Press the "Next" button, the following dialog will appear:

...

The Network Control Center offers to check whether the DECnet address, to be used by CHARON, is unique on the network in this step. Enter the desired DECnet address, for the CHARON guest, and press the "Next" button:

Once the checking is completed, if there are any issues, the utility will abort the test and display a log containing information about the issues found:

...

Enter the IP address and subnet mask to be used by the CHARON guest, then press the "Next" button:

The Network Control Center will display the log of the performed operations:

...