Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Anchor
TOC
TOC
Include Page
KBCOMMON:KB-CSSstyle
KBCOMMON:KB-CSSstyle

...

The following table represents all the parameters defined by CHARON-VAX license:

GeneralProducts relevantOptional
  • Physical key ID

  • License Number

  • End user name

  • Master key ID

  • License release date and time

  • Update Number

  • Purchasing Company name. In most cases the company to which the key was issued originally

  • Commercial product name

  • Commercial product code

  • Commercial product version and range of build numbers suitable for running

  • Range of CHARON-VAX virtual models available for running

  • Type of host CPU required

  • Host operating system required

  • Number of virtual CPUs enabled for virtual SMP systems

  • Minimum number of host CPU cores required

  • Minimum host memory required

  • Maximum memory emulated. If not present the value defaults to the maximum memory possible for the particular virtual system. Note that the maximum memory may not be available to the virtual system if the host computer has insufficient physical memory.

  • Maximum number of CHARON-VAX instances that can be run concurrently

  • Whether or not CHAPI (CHARON-VAX API) can be used with this product

  • Product and Field Test expiration dates (if any)

  • Product and Field Test executions counter (if any)

  • Maximum number of hosts that may run CHARON-VAX concurrently (in the case of a networking license)

  • Level of support (if any), end date of any support contract, the "First Line" Service Provider

  • Frequency of CHARON-VAX license checking during CHARON-VAX execution

  • Possibility to attach hardware QBUS/UNIBUS hardware via adapter

  • Parameter that reduces the maximum speed of the program

  • Parameter that enables the product to support additional serial lines through an option board from a company such as DIGI

  • Parameter that prohibits use of Advanced CPU Emulation. If not present the Advanced CPU Emulation is enabled

  • Parameter that enables emulation of IEQ11-A IEEE488 Controller (on top of DCI-3100 IEEE488 Controller

  • Parameter that enables emulation of DRV11-WA I/O controller (on top of DCI-1100 I/O controller)

...

When needed, it is possible to use a special parameter in the CHARON-VAX configuration file to specify exactly which license must be used by each particular instance of CHARON-VAX:


Parameter

license_key_id

TypeText string
Value

A set of Sentinel Key IDs that specifies the license keys to be used by CHARON. It is also possibly to use a keyword "any" to force CHARON to look for a suitable license in all available keys if the license is not found in the specified keys.

Example:

set session license_key_id = "1877752571,354850588,any"

Based on the presence of this parameter in the configuration file, CHARON behaves as follows:
 

  1. No keys are specified (the parameter is absent)
    CHARON performs an unqualified search for any suitable key in unspecified order. If no key is found, CHARON exits.

  2. One or many keys are specified
    CHARON performs a qualified search for a regular license key in the specified order. If it is not found, CHARON exits (if the keyword "any" is not set).

If the keyword "any" is specified then if no valid license has been found in the keys with specified ID’s all other available keys are examined for valid license as well.

The order in which keys are specified is very important. If a valid license was found in the key which ID was not the first one specified in configuration file, then available keys are periodically re-scanned and if the key with the ID earlier in the list than the current one is found CHARON tries to find a valid license there and in case of success switches to that key.


...

Disable remote keys access

A helpful feature of the Sentinel Admin Control Center is the ability to disable access to remote keys. If the network key is installed locally, access to the key from remote hosts can be disabled. The following examples demonstrate how this can be done.

To disable access to remote keys, switch to the "Access to Remote License managers" tab, uncheck the "Allow Access to Remote Licenses" checkbox and press the "Submit" button to apply this setting:

To disable access to the locally installed license key from remote hosts, switch to the "Access from Remote Clients" tab, uncheck the "Allow Access from Remote Clients" checkbox and press the "Submit" button to apply this setting:

Include Page
KBCOMMON:DOC-GoToToc
KBCOMMON:DOC-GoToToc

Accessing Sentinel Admin Control Center from remote hosts

By default, the Sentinel Admin Control Center forbids accessing its web interface from remote machines.

To allow access, configure the ACC for remote management:

In this cannot be done using the WEB interface, edit the "hasplm.ini" file:

# vi /etc/hasplm/hasplm.ini

(warning) In the file does not exist, please refer to this article: How-to enable remote connection to Sentinel Admin Control Center without GUI

Allow remote access by changing the "ACCremote" parameter from "0" to "1", make sure the parameter "bind_local_onlyis set to 0 (the value 1 means localhost-only) then restart the Sentinel Admin Control Center run-time:

# systemctl restart aksusbd

(or for RHEL 6.x: # service aksusbd restart)

If the CHARON-VAX host firewall is blocking remote access to the Sentinel Admin Control Center, please configure the firewall to open the port 1947 (TCP protocol). Refer to the Linux documentation for details on how to configure the firewall. It is also possible to use SSH port forwarding with the following command (replace "CHARON_MACHINE" by the real CHARON-VAX host name):

# ssh -L8080:CHARON_MACHINE:1947 root@CHARON_MACHINE

This will expose the Sentinel Admin Control Center on port 8080 to any computer and it will believe commands are coming from the local host.

Include Page
KBCOMMON:DOC-GoToToc
KBCOMMON:DOC-GoToToc

License management utilities

CHARON-VAX for Linux provides a specific utility for license management - "hasp_srm_view". This utility is used to display the license(s) content, to collect key(s) status information and host fingerprint (C2V) files.


Info

Applying updates (".v2c" files) is typically done using the Sentinel Admin Control Center (see above) but alternatively it is also possible to use the specific "hasp_update" utility.

Please refer to the Utilities section of this Guide for more details.

Include Page
KBCOMMON:DOC-GoToToc
KBCOMMON:DOC-GoToToc


Div
classpagebreak



Removing CHARON-VAX software licenses

The following procedure must be applied to remove software license:
 

  1. Using your web browser, open the http://localhost:1947 page to access the "Sentinel HASP Admin Control Center" (ACC).
  2. In the "Sentinel HASP Admin Control Center" (ACC), locate the target "Sentinel SL AdminMode" license.
  3. Press the "Certificates" button at the right side of the SL description: 
  4. Note the name of the corresponding certificate and path to the certificates base in the "Certificates" section.
  5. Remove the target certificate file from the specified directory, in most cases: "/var/hasplm/installed/68704/".
  6. Restart the aksusbd service (# systemctl restart aksusbd or # service aksusbd restart) or reboot the CHARON host.
  7. Start the "Sentinel HASP Admin Control Center" (ACC) again to ensure that the SL has been removed.


License deinstallation

To completely remove a CHARON-VAX license from a host, it is enough to remove the Sentinel run-time daemon (and the package "charon-license-<...>.rpm" containing the run-time customization) using the following command:

# rpm --nodeps -e aksusbd charon-license-<...>

Then just physically disconnect the license key (in the case of protection by dongles).


Special "backup" license keys

Backup keys are provided by STROMASYS along with standard license dongles. It is strongly recommended to order a backup key to recover immediately from damage or loss of the main license key. Backup keys use a counter (integer) value hardcoded inside the key. This integer value is a number of hours CHARON-VAX is allowed to run. Each time CHARON-VAX checks the license (every hour), the value is decreased (by 1 hour).Please note that backup keys have restricted functionality:

  • CHARON run time is typically limited to 720 hours (30 days). This should be more than enough time to get a replacement from STROMASYS.
  • A backup license may be valid only until a certain date. Please check with STROMASYS management.
Include Page
KBCOMMON:DOC-GoToToc
KBCOMMON:DOC-GoToToc