| Include Page |
|---|
| KBCOMMON:KB-CSSstyle |
|---|
| KBCOMMON:KB-CSSstyle |
|---|
|
...
You can optionally uncomment this line to differentiate this CHARON-AXP instance from all others in a multi-instances environment. The configuration name can be any label that is meaningful. It is reported in the log file and is used to set the log file name for rotating log (see further: Rotating log (default) ).
| Include Page |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
|
...
| Panel |
|---|
| borderColor | #EDEDEE |
|---|
| bgColor | #FFFFFF |
|---|
| titleColor | #000000 |
|---|
| titleBGColor | #EDEDEE |
|---|
| title | CHARON-AXP log file example (part1) |
|---|
|
20200310:035210:INFO :0:000003A5:hexane.cxx(5938): session: loading built-in configuration "AlphaServer_ES40"...
20200310:035210:INFO :0:000003A6:hexane.cxx(5959): session: ... done loading built-in configuration "AlphaServer_ES40"
20200310:035210:INFO :0:000003AA:hexane.cxx(5988): session: loading configuration file "es40.cfg"...
20200310:035210:INFO :0:000003AB:hexane.cxx(6012): session: ... done loading configuration file "es40.cfg"
20200310:035210:INFO :0:000003F2:sesmgr.cxx(1410): session: default log file size limit is 4194304 bytes
20200310:035210:INFO :0:0000032B:hexane.cxx(2698): Start request received.
20200310:035211:INFO :0:000003AC:hexane.cxx(1424): session: process affinity is 000000000000000F, system affinity is 000000000000000F
20200310:035211:INFO :0:000003D1:hexane.cxx(1686): session: I/O domain affinity is 0000000000000001, CPU domain affinity is 000000000000000E
20200310:035211:INFO :0:0000024D:licenseman(1823): Checking the available license key "1918154109".
20200310:035211:INFO :0:0000024D:licenseman(1823): Found license key: "1918154109".
20200310:035211:INFO :0:0000024D:licenseman(1823): Checking product section 0.
20200310:035211:INFO :0:0000024D:licenseman(1823): License number: "000.msc.test.center.nikolaev".
20200310:035211:INFO :0:0000024D:licenseman(1823): Product License number: "CHAXP/AXP".
20200310:035211:INFO :0:0000024D:licenseman(1823): CHARON product code: "CHAXP-411xx-WI-LI".
20200310:035211:INFO :0:0000024D:licenseman(1823): Unlimited license.
20200310:035211:INFO :0:0000024D:licenseman(1823): Feature 2 check interval 1 hour(s).
20200310:035211:INFO :0:0000024D:licenseman(1823): Concurrency info:
20200310:035211:INFO :0:0000024D:licenseman(1823): There are 10 instances allowed.
20200310:035211:INFO :0:0000024D:hexane.cxx(2848): STROMASYS SA, (C) 2009-2020
20200310:035211:INFO :0:00000408:hexane.cxx(2892): CHARON-AXP (AlphaServer ES40), V 4.11 B 20403, Mar 10 2020 / 000.msc.test.center.nikolaev / 1918154109
20200310:035211:INFO :0:00000336:hexane.cxx(2924): The end user of this software has agreed to STROMASYS' Terms and Conditions for Software License and Limited Warranty, as described at: http://www.stromasys.com/pub/doc/30-17-033.pdf
20200310:035211:INFO :0:00000097:hexane.cxx(2999): OS Environment: Red Hat Enterprise Linux Server release 7.4 (Maipo), Linux 3.10.0-693.5.2.el7.x86_64 #1 SMP Fri Oct 13 10:46:25 EDT 2017 x86_64.
20200310:035211:INFO :0:00000098:hexane.cxx(3004): Host CPU: GenuineIntel, Family 6, Model 42, Stepping 1, Intel Xeon E312xx (Sandy Bridge), 1 Sockets, 1 Cores per Socket, 4 Threads per Core, at ~2593 MHz, 4 cpu's available
20200310:035211:INFO :0:00000099:hexane.cxx(3009): Host Memory: 3840Mb
20200310:035211:INFO :0:0000041F:hexane.cxx(3224): Configuration dump::
|
...
The first line ("load KZPBA PKA") loads disk controller KZPBA with name "PKA", followed by 8 group of lines showing different ways of mapping to the host resources:| Status |
|---|
| colour | Red |
|---|
title | TO DO PDF export issues, left column is not correctly displayed, rework this table| Type of mapping | Description |
|---|
| "<file-name>.vdisk" | Mapping to files representing physical disks of the HP Alpha system (disk images).
These files can be created from scratch with "mkdskcmd" utility. Data and OS disk backups are transferred from the original system via tapes or network and restored into these container files.
Mapping may also include the full path, for example: "/my_disks/my_boot_disk.vdisk" |
| "/dev/sd<L>" | Mapping to physical disk. "L" is letter here.  Be careful not to destroy all the information from the disk dedicated to CHARON-AXP by mistake. These disks must not be formatted by the host OS.  It is also possible to use not a whole disk, but previously created partitions on it. In this case the syntax is the following: "/dev/sd<L><N>" where N is the number of partition to be used.
| Note |
|---|
Since "/dev/sd<L>" addressing is not persistent, it is strongly recommended to use "/dev/disk/by-id/wwn-*" syntax instead to refer the disk by its WWID - especially in the enviroments utilizing FC and SAN storages (see below). |
|
"/dev/dm-<N>"
"/dev/mapper/mpath<N>"
"/dev/mapper/disk<N>" | Mapping to multipath disk. Be careful not to destroy all the information from the disk dedicated to CHARON-AXP by mistake. These disks must not be formatted by the host OS. |
| "/dev/disk/by-*" | Mapping to physical disk. - by-id (addressing by the disk ID, for example "/dev/disk/by-id/ata-ST1000DM003-9YN162_S1D01QJ4")
- by-label (addressing by the disk label, for example "/dev/disk/by-label/MyStorage")
- by-uuid (addressing by the disk UUID, for example "/dev/disk/by-uuid/0e808a2f-cdd3-4944-a245-f729ffd73882")
Be careful not to destroy all the information from the disk dedicated to CHARON-AXP by mistake. These disks must not be formatted by the host OS. |
| "/dev/sg<N>" | Direct mapping to some SCSI device, for example, a SCSI disk or tape reader. How to find proper "/dev/sg" device is explained in this section. |
"/dev/sr<N>"
"/dev/cdrom"
"/dev/cdrom<N> | Mapping to host CD-ROM device. |
| "<file-name>.iso" | Mapping to an ISO file for reading distribution CD-ROM image.
Mapping may also include the full path (recommended), for example: "/my_disks/vms_distributive.iso" |
| "<file-name>.vtape" | Mapping to the file representing the tape (tape image).
These files are created automatically.
Mapping may also include a full path (recommended), for example: "/my_tapes/backup.vtape" |
Additionally it is possible to specify a parameter "media_type" to assign the type of the attached media explicitly.
...
It can be configured in 2 modes:
Below is an example of KGPSA-CA controller loading:
...
Follow this link for details of KGPSA-CA controllers configuration.
| Include Page |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
| KBCOMMON:DOC-GoToToc |
|---|
|
KGPSA-CA mapping to the host resources
...
The first line ("load KGPSA FGA") loads disk controller KGPSA with name "FGA", followed by 2 groups of lines showing different ways of mapping to the host resources:
PDF export issues, left column is not correctly displayed, rework this table| Type of mapping | Description |
|---|
| "<file-name>.vdisk" | Mapping to the file representing a physical disk of the HP Alpha system (disk image).
These files can be created from scratch with "mkdskcmd" utility. Data and OS disk backups are transferred from the original system via tapes or network and restored into these container files.
Mapping may also include the full path (recommended), for example: "/my_disks/my_boot_disk.vdisk" |
| "/dev/sd<L>" | Mapping to physical disk. "L" is letter here Be careful not to destroy all the information from the disk dedicated to CHARON-AXP by mistake. These disks must not be formatted by the host OS. It is also possible to use not a whole disk, but previously created partitions on it. In this case the syntax is the following: "/dev/sd<L><N>" where N is the number of partition to be used. | Note |
|---|
Since "/dev/sd<L>" addressing is not persistent, so it is strongly recommended to use "/dev/disk/by-id/wwn-*" syntax instead to refer the disk by its WWID - especially in the enviroments utilizing FC and SAN storages (see below). |
|
"/dev/dm-<N>"
"/dev/mapper/mpath<N>"
"/dev/mapper/disk<N>" | Mapping to multipath disk. Be careful not to destroy all the information from the disk dedicated to CHARON-AXP by mistake. These disks must not be formatted by the host OS. |
| "/dev/disk/by-*" | Mapping to physical disk. - by-id (addressing by the disk ID, for example "/dev/disk/by-id/ata-ST1000DM003-9YN162_S1D01QJ4")
- by-label (addressing by the disk label, for example "/dev/disk/by-label/MyStorage")
- by-uuid (addressing by the disk UUID, for example "/dev/disk/by-uuid/0e808a2f-cdd3-4944-a245-f729ffd73882")
Be careful not to destroy all the information from the disk dedicated to CHARON-AXP by mistake. These disks must not be formatted by the host OS. |
Numbers in the square brackets represent KGPSA-CA units. They can be in the range 0..32766, but no more than 255 units can be configured on a single controller.
...